HD-TVI DVR: Hikvision iDS-7216HUHI-M2/S(E)/4A+16/4ALM (16 Ch, 8 MP, 8 fps, H.265, 8 × AcuSense)

Code: M75535
Price Disc. Quantity Validity
€871.72 0 % from 1 piece
16-channel Hikvision DVR for up to 8 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• AcuSense video analytics based on Deep Learning in 4 channels
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 Mpix, Hikvision brand or others via Onvif)
• 4 audio inputs, 16 audio inputs, 4 alarm outputs
• Additional independent CVBS video output
• Possible to replace analog channels via IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – excludes VCA analysis)
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support


3-year warranty.



Hikvision iDS-7216HUHI-M2/S(e) is a 16-channel, multi-system DVR capable of recording video from cameras: HD-TVI, AHD, CVBS and IP.
The DVR for an analog system can record images with the following resolution and frame rate:
  • 8 MP at 8 fps (for HD-TVI system),
  • 5 MP at 12 fps,
  • 4 MP at 15 fps,
  • 3 MP at 18 fps,
  • 2 MP (1080p) and below 25 fps.
In a standard mode of operation, 16 analog cameras can be connected to BNC inputs, as well as 8 IP cameras with a resolution of up to 8 MP. If any of the analog channels are not used, they can be turned off, allowing additional IP cameras to be connected. If all analog channels are disabled, as many as 24 IP cameras can be connected.
Enhanced IP mode
Activating Enhanced IP mode increases the number of supported IP channels. It is possible to support up to 16 IP cameras with a resolution of 4 MP (the number of cameras can be expanded to 32, if all analog channels are disabled).

In Enhanced IP mode, the Intelligent Events (IVS) function on analog channels is disabled, and the resolution of HDMI/VGA video outputs is limited to 1080p. To activate this mode, direct access to the DVR menu is required.
H.265 / H.265 video compression+
The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed using the H.265 method. Compared with its predecessor (H.264), H.265 can reduce the data stream by half, which translates into proportional disk space savings and extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.
Motion detection 2.0
Motion Detection System 2.0 can analyze motion detection events for human or vehicle detection. Thanks to that, alarm notifications are filtered and unnecessary alarms are blocked. Recordings can be filtered for human or vehicle detection.
Artificial intelligence AI and AcuSense technology
Artificial intelligence plays a key role in CCTV systems. Cameras and recorders with AcuSense technology analyze the image based on a deep learning algorithm. They reflect the structure and principles of the human brain. As in the brain, learning creates connections between artificial neurons (programs) and creates a multi-layer artificial neural network. The algorithm individually analyzes model photos and recordings, looking for common features, and then creates appropriate connections. The so-called layers, responsible for detecting a specific feature, are built this way. The more layers an algorithm has, the more accurate the analysis is. Therefore, teaching with large amounts of data is crucial. Only multi-layer networks can collect information and perform appropriate actions, in particular automatic extraction and representation of features (patterns) present in the data, teaching the network for example to recognize faces, vehicle brands, animal species or incident, e.g. a fall. This model of DVR has 4 channels with AcuSense function.
On four selected analog channels, it is possible to run virtual line crossing detection (together with line crossing direction determination) and intrusion detection in a quadrant area. Events can be filtered for human or vehicle detection.
Sophisticated client software
The iVMS 4200 client software enables users to manage Hikvision devices in IP networks. The software enables the configuration and management of NVRs/DVRs, IP and analog cameras in hybrid systems. The iVMS 4200 utility can remotely manage up to 256 devices on up to 4 monitors. One monitor can display images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifications, two-way audio transmission, and multi-level e-maps.
The control panel of the iVMS-4200 application
Hik-Connect is a mobile application intended for smartphones with the Android and iOS operating systems. It can be used for the remote live viewing of footage from DVRs, NVRs, network cameras via Wi-Fi, 2G, or 3G networks, as well as the playback of recorded video files. The application connects to the devices by IP addresses and/or through the P2P cloud service.
The start menu of the Hik-Connect app
with a live view thumbnail
The live view screen
Working in the cloud
Hik-Connect is also the name of a network service intended for Hikvison devices. The service relies on P2P cloud computing for remote viewing via smartphones and tablets, and provides extensive monitoring and basic configuration options: live viewing (multiple channels), PTZ control, digital zoom, acoustic monitoring, playback of archival video, and alarm notifications (intrusion, line crossing, etc.).
Main features of the Hik-Connect service:
  • only basic network configuration is required,
  • no external IP address or port forwarding are needed,
  • p2p connection via the cloud or smartphone client application Android, iOS,
  • image encryption.
Advanced applications for organizing and operating CCTV systems
Our library provides an overview of applications dedicated for installers and users of monitoring systems based on Hikvision devices.

The main window of the SADP software
SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software, its use and password recovery (par. 8) can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.


Model iDS-7216HUHI-M2/S(STD)(E)/4A+16/4ALM
Product type Analog HD DVR
Brand Hikvision
Series TurboHD 5.0
Analog video inputs number 16
Maximum resolution MP 5, 8
Signals supported multi-system (HD-TVI, HD-CVI, AHD, CVBS)
default signal HD-TVI
exchangeable for IP Yes 1:1
IP video inputs number in standard mode 8
quantity after switching off analog channels 24
number in Enhanced IP mode (4 MP limit) 16
Number after switching off analog channels in Enhanced IP mode (4 MP limit) 32
Maximum resolution MP 8
Recording Video compression H.265+/H.265/H.264+/H.264/MPEG4
speed for default signal kl . /s 8 for 8 MP, 12 for 5 MP, 14 for 4 MP, 15 for 3 MP, 25 for 2 MP and below
speed of other HD signals kl . /s 12 for 5 MP, 14 for 4 MP, 25 for 1080p and below
bitrate of a single video channel 32 Kb/s – 10 MBps
Audio compression G.711U
audio channel bitrate 64 Kbps
Max. resolution of video outputs HDMI 1 px 3840 × 2160 (4K)
VGA 1 px 1920 × 1080
BNC 704 × 576 (CVBS)
Video output modes Parallel HDMI1/VGA1
Decoding live view/playback number of channels 16
HDD number of SATA II interfaces 2
max. capacity of each HDD TB 10
Image analysis (conventional algorithm)
Basic incidents Motion detection, Image tampering, Alarm input, Exception, Alarm output
Advanced incidents Line crossing detection, Area entry detection, Detection of exit from the area
Intelligent image analysis (Deep Learning algorithm)
AcuSense filtr fałszywych alarmów number 4
Filter human, vehicle Motion detection 2.0, Line crossing detection, Area entry detection, Detection of exit from the area
USB 2.0 1
3.0 1
Two-way audio Yes
Audio Input 4, RCA
Output 1, RCA (linear, 1 kOhm)
Alarm inputs/outputs Yes
Alarm Input 16
Output 4
Serial interfaces RS-485
Ethernet 1 × RJ-45 10/100/1000
Applications Hik-Connect, iVMS-4200
Archiving USB, Remote
Network protocols TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP™, HTTPS, ONVIF
Power supply output DC V 12
DC A 5
Power consumption (without HDD) DC W 19
Operating temperature °C -10 ...+ 55
Humidity % 90 or less (non-condensing)
Dimensions (W × D × H) mm 380 × 320 × 48
Height U 1
Weight kg 2,1