HD-TVI TURBO HD 3.0 DVR: Hikvision DS-7208HUHI-F2/S (8ch, 5MP@10fps, H.264, HDMI, VGA)

Code: M75508
This product is no longer available
Estore: Library:

Support

Details

HD-TVI TURBO HD 3.0 DVR: Hikvision DS-7204HUHI-F1/S (4ch, 5MP@10fps, H.264, HDMI, VGA)
Front view

HD-TVI TURBO HD 3.0 DVR: Hikvision DS-7204HUHI-F1/S (4ch, 5MP@10fps, H.264, HDMI, VGA)
Rear view

HD-TVI TURBO HD 3.0 DVR: Hikvision DS-7204HUHI-F1/S (4ch, 5MP@10fps, H.264, HDMI, VGA)
View of the included remote control
HD-TVI TURBO HD 3.0 DVR: Hikvision DS-7204HUHI-F1/S (4ch, 5MP@10fps, H.264, HDMI, VGA)
View of the included accessories
Key features:
  • HD-TVI video recording resolution: 5 MP at 10 fps, 3 MP at 15 fps; 1080p and lower resolutions at 25 fps,
  • Recording resolution of HD-CVI, AHD video: 2 MP at 25 fps,
  • Support for 8 HD-TVI, AHD or CVBS cameras and two IP cameras (Hikvision or others by Onvif, max. 4 MP),
  • H264+ video compression,
  • Support for IE, Google Chrome, Opera, Safari,
  • Channel 0 - possibility to monitor all cameras with minimum demand for network bandwidth,
  • Parallel operation of HDMI (4K, 30Hz) and VGA (2K, 60Hz) outputs,
  • CVBS output,
  • Searching recordings by alarm events,
  • VCA image analysis function,
  • Digital video zoom during live monitoring and playback,
  • Synchronous playback from 8 channels,
  • Support for IPv4, IPv6,
  • Monitoring the statuses of LAN, cameras, hard drives.
Hikvision DS-7208HUHI-F2/S is an 8-channel CCTV DVR capable of recording surveillance video provided in HD-TVI, AHD, CVBS and IP standards. The maximum recording resolution is 5 MP @ 10 fps. Other supported video resolutions are 3 MP @ 15 fps and 1080p / 960x1080 / 720p / VGA / WD1 / 4CIF / CIF at the maximum frame rate of 25 fps.
The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed with the use of H.264 or H.264+ method. The H.264+ video compression method has been specially developed for video surveillance systems. This method is especially efficient in the case of static scenes, preserving image quality similar to H.264 but generating considerably smaller data stream, which saves disc space.
Footage can be recorded in different modes: continuous, motion detection (with pre- and post-event recording), alarm (with pre- and post-event recording), or continuous recording with special parameters for specific events. Each channel can be configured individually in this respect. It is possible to change the resolution, quality, and frame and bit rates independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering, etc), the DVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less storage media space.
Each channel can be independently set up for intelligent image analysis to detect intrusion and virtual line crossing (including direction) within a rectangular area.
In addition, a VQD (video quality detection) function can send e-mails or notifications to alert the user whenever the image is out of focus, too bright, or discolored).
The iVMS 4200 client software enables users of HIKVISION devices to manage them in IP networks. The software allows for configuration and management of NVRs/DVRs, IP and analog cameras (in hybrid systems). The iVMS 4200 utility can remotely manage up to 256 devices, with the use of up to 4 monitors. Oner monitor can display up images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifying, two-way audio transmission, creating multi-level e-maps.
View of the control panel of the iVMS-4200 application
iVMS-4500 is a mobile application for smartphones running Android, iOS or Windows Phone operating systems. It can be used for live monitoring and playback of images from DVRs, NVRs, IP cameras via Wi-Fi, 2G or 3G networks.
Device Information window
in the iVMS-4500 app
Live View window
in the iVMS-4500 app
Ezviz (EasyVision) is a free service which can be activated in Hikvision NVRs and IP cameras. This free service allows less advanced users to easily access to the video from the cameras via the Internet, without forwarding router ports. To enable remote access, the user should only connect the device to the network (which requires a valid IP address and appropriate gateway settings). The next step is the creation of user account at the www.ezviz7.com website. The account can accommodate devices in a local area network (with activated Ezviz service). The devices will be available from anywhere via the Internet.
SADP (Search Active Device Protocol) is a free and simple to use utility for searching Hikvision IP cameras and Hikvision DVRs/NVRs in the local network. The network device search tool can also be used for modification of network parameters of the Hikvision devices, including the change of passwords or recovery of default passwords. Detailed information on the software and its use is contained in the SADP application - LAN tool for organizing CCTV systems based on Hikvision devices article.

Specifications:
Name/modelDS-7208HUHI-F2/S
CodeM75508
Video formats
HD-TVI, AHD, CVBS, IP
Video inputs
BNC x 8 + 2x IP channel
Video outputs
HDMI, VGA, CVBS
HDMI/VGA resolutions

4K: 3840×2160, 30 Hz (HDMI only)
2K: 2560×1440, 60 Hz
1080p: 1920x1080
SXGA: 1280x1024
720p: 1280x720
XGA 1024x768

Audio input / output connectorsRCA 4 / 1
Alarm inputs / outputs
8 / 4
Alarms and exceptionsMotion detection, video loss, camera tampering
Live monitoring
25 fps
Recording options5 MP
10 fps
3 MP
15 fps
1080p25 fps
720p25 fps
WD1/4CIF25 fps
CIF
25 fps
Video bit rate range (single channel)32 kbps - 10 Mbps
Audio bit rate64 kbps
HDD capacity & interface1 x max 6 TB SATA HDD
S.M.A.R.T. monitoring toolsYES
NAS/SAN compatibility
YES (NAS)
External ports
1x USB 3.0, 1x USB 2.0; RS-485; RJ-45 (10M/100M/1000M Auto)
Secondary stream
WD1, 4CIF, CIF, QVGA, QCIF
Network protocols
TCP/IP; DHCP; DDNS; PPPoE; email; NTP; SNMP; UPnP
Software ports
Server - 8000
HTTP - 80
RTSP - 554
Remote monitoring
Internet Explorer; after installing plugins - Firefox, Safari;  smartphones (Android, Windows Mobile)
PTZ protocols
Yes
ArchivingUSB storage device, remote server
Power input
12 VDC / 2 A (dedicated PSU)
Power consumption
<20 W (without HDD)
Operating temperature-10°C...55°C
Operating humidity
10%...90%
Dimensions ( W x D x H )380 x 320 x 48 mm