View of the receiver and transmitter (sender) units

Opposite side view

View of the included accessories

The Signal-HD HDMI to IP converter/extender enables the user to connect remote (up to 100 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units. The receiver unit is powered remotely via the transmitter unit. Aside from transmission of HDMI signal, the set allows the user to control the source of the signal from the location of the television/monitor (function of IR extender).

IP signal coming from the transmitter may be applied to an Ethernet switch to split it among multiple receivers (in this case each receiver unit has to be powered from additional power supply). The bit rate of the compressed signal at the output of the transmitter is about 15 Mbps (multicast transmission). The output signals can be properly decoded only by the dedicated receivers - it cannot be done by PCs equipped with network cards. The set is not compatible with H3604 and H3605 devices.

The set is perfect for connecting remote HD source like sat receiver, Blu-ray player, PC, game console etc. to HD-enabled TV/monitor/projector. It requires to use only one, comparatively thin cable, which makes it easy to hide it, e.g. when installing the TV/monitor on an LCD/LED mount.

An application of the HDMI > IP converter/extender (point-to-point)

An application of HDMI > IP converter/extender units (point-to-multipoint)

Name	HDMI to IP converter/extender SignalHD
Code	H3620
Supported video formats	DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p
Max length of cat.5e cable	100 m
Receiver unit powering	remotely from transmitter unit
Operating temperature range	-10ºC...60ºC
Operating humidity range	20%-90% (no condensation)
Dimensions	110x58x26 mm
Power	230 VAC / 5 VDC  adapter