HDMI IR Transmit.
HDMI >> IP
HDMI to IP Converter: Signal HD - Receiver (unicast)
Code: H3615
General view
The included power supply
Signal-HD HDMI to IP converter H3614 (set) enables the user to connect remote (up to 100 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. By employing additional receiver units H3615, the user can increase the number of televisions/monitors displaying the same content.
Key features
- Transmission via a single Cat. 5e/6 cable
- UDP/IP protocol (unicast)
- Possibility of point-to-multipoint topology
- Support for 1080p mode
- Maximum length of cable: 100 meters
IP signal coming from the transmitter (from the H3614 set) may be applied to an Ethernet switch to split it among multiple receivers. The bit rate of the compressed signal at the output of the transmitter is about 15 Mbps. The output signals can be properly decoded only by the dedicated receivers - it cannot be done by a PC equipped with a network card. Due to unicast connection, the set is not compatible with H3604 and H3605 devices.
An application of the HDMI > IP converter/extender (point-to-point)
An application of HDMI > IP converter/extender units (point-to-multipoint)
Specifications
| Name | HDMI to IP converter - receiver (unicast) |
| Code | H3615 |
| Supported video formats | DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p |
| Max length of cat.5e cable | 100 m |
| Operating temperature range | -10ºC...60ºC |
| Operating humidity range (RH) | 20%-90% (no condensation) |
| Dimensions | 110x58x26 mm |
| Power | 230 VAC / 5 VDC |
HDMI to IP Converter: Signal HD - Receiver (unicast)
Code: H3615
COMPLETE WITH
SECTION LIBRARY
»
In the Home (6)
»
SMATV Systems (13)
»
»
Designing (4)
»
Measurements (2)
»
Diagrams (13)
»
Some Theory (14)
»
DVB-T (7)
»
DAB (1)
LIBRARY NEW TITLES
TO KNOW MORE