HDMI IR Transmit.
HDMI >> IP
HDMI to IP Converter: Signal HD (multicast)
Code: H3614
General view
The included power supplies
The Signal-HD HDMI to IP converter enables the user to connect remote (up to 100 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units.
Key features
- Transmission via a single Cat. 5e/6 cable
- UDP/IP protocol (multicast)
- Possibility of point-to-multipoint topology
- Support for 1080p mode
- Maximum length of cable: 100 meters
IP signal coming from the transmitter may be applied to an Ethernet switch to split it among multiple receivers. The bit rate of the compressed signal at the output of the transmitter is about 15 Mbps (multicast transmission). The output signals can be properly decoded only by the dedicated receivers - it cannot be done by a PC equipped with a network card. The set is not compatible with H3604 and H3605 devices.
The set is perfect for connecting remote HD source like sat receiver, Blu-ray player, PC, game console etc. to HD-enabled TV/monitor/projector. It requires to use only one, comparatively thin cable, which makes it easy to hide it, e.g. when installing the TV/monitor on an LCD/plasma mount.
An application of the HDMI > IP converter/extender (point-to-point)
An application of HDMI > IP converter/extender units (point-to-multipoint)
Specifications
| Name | HDMI to IP converter |
| Code | H3614 |
| Supported video formats | DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p |
| Max length of cat.5e cable | 100 m |
| Operating temperature range | -10ºC...60ºC |
| Operating humidity range | 20%-90% (no condensation) |
| Dimensions | 110x58x26 mm |
| Power | 230 VAC / 5 VDC |
HDMI to IP Converter: Signal HD (multicast)
Code: H3614
COMPLETE WITH
SECTION LIBRARY
»
In the Home (6)
»
SMATV Systems (13)
»
»
Designing (4)
»
Measurements (2)
»
Diagrams (13)
»
Some Theory (14)
»
DVB-T (7)
»
DAB (1)
LIBRARY NEW TITLES
TO KNOW MORE