English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
€45.29
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €45.29 | 0 % | from 1 piece |
Available
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
Details
Note: version 4.0 is not compatible with version 3.0 and 2.0 devices.
Signal-HD HDMI to IP converter H3614 (set) enables the user to connect remote (up to 100 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. By employing additional receiver units H3615, the user can increase the number of televisions/monitors displaying the same content.
IP signal coming from the transmitter (from the H3614 set) may be applied to an Ethernet switch to split it among multiple receivers. The bit rate of the compressed signal at the output of the transmitter is about 15 Mbps. The output signals can be properly decoded only by the dedicated receivers - it cannot be done by a PC equipped with a network card. Due to unicast connection, the set is not compatible with H3604 and H3605 devices.
The system is perfect for connecting remote HD source like sat receiver, Blu-ray player, PC, game console etc. to HD-enabled TVs/monitors/projectors. The connection to each of the TVs/monitors requires to use only one, comparatively thin cable, which makes it easy to hide it, e.g. when installing the TV/monitor on an LCD/LED mount.
Key features
- Transmission via a single Cat. 5e/6 cable
- UDP/IP protocol (unicast)
- Possibility of point-to-multipoint topology
- Support for 1080p mode
- Maximum length of cable: 100 meters
An application of the HDMI > IP converter/extender (point-to-point)
The converter/extender uses High-Definition Digital Bit Transmission Technology (HDbitT). HDbitT is a protocol used for professional delivery/transmission of high-quality image and audio over IP networks. The protocol supports video resolutions of up to 4Kx2K @ 60Hz, transmitted wirelessly or over network cables, electrical installations, optical fibers, or coaxial cables.
Specifications
| Name | HDMI to IP Signal converter (multicast) v4.0 | ||
| Product type | HDMI to IP converter | ||
| Manufacturer | SIGNAL | ||
| Interfaces | |||
| Transmitter interfaces | HDMI | Yes | |
| RJ-45 | Yes | ||
| Receiver interfaces | HDMI | Yes | |
| RJ-45 | Yes | ||
| Device properties | |||
| Video formats supported | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p | ||
| transmission protocol | HDbitT | ||
| Max length of twisted pair cable | cat. 5 | m | 100 |
| cat. 5e | m | 100 | |
| cat. 6 | m | 100 | |
| cat. 6A | m | 100 | |
| cat. 7 | m | 100 | |
| Max. number of receivers | 253 | ||
| Device properties | |||
| Transmitter power supply | VDC | 5 | |
| Receiver power supply | VDC | 5 | |
| Dimensions | mm | 110 × 58 × 26 | |
| Mounting | standalone | ||
| Certificates | CE | ||
| Package content | HDMI receiver | ||
| Operating environment | |||
| Temperature | operation | ℃ | -10...+60 |
| Humidity | air | % | 20...90 |
