This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

High Speed Dome Camera: PH-10H (3.8-38 mm, 500 TVL,Sony Interline Transfer CCD, 0.7 lx)

Code: M1192
This product is no longer available
Estore: Library:

Support

Any questions or comments?

  • Write to us!

Details

High speed dome camera PH-10H with 3.8-38 mm zoom lens is a day/night PTZ device using SONY image sensor and mechanically switching IR cut filter.
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the camera

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
Rear view - visible cable running through the bracket
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the included accessories
Distinguishing features:
  • 3.8-38 mm zoom lens;
  • horizontal resolution: 500 TVL (color) / 570 TVL (B/W);
  • zoom: 10x optical, 10x digital;
  • mechanically switching IR cut filter;
  • intuitive OSD menu, up to 4 privacy zones;
  • small size: diam.144 x 177 mm (bracket: 170 x 120 x 80 mm).
High speed dome camera PH-10H is one of the smallest PTZ cameras on the market! The camera features Interline Transfer Sony CCD sensor with horizontal resolution of 500 TVL in color mode and 570 TVL in B/W mode. Its zoom lens has focal length changeable from 3.8 mm to 38 mm, which provides viewing angle from 51o to 5o degrees. The camera provides very good results in low light conditions and in cooperation with infrared illuminators (sensitivity of 0.02 lx in B/W mode, mechanically switching IR cut filter).
The camera is controlled via advanced OSD menu, containing many useful functions. There is the option to increase sensitivity of the camera using Sense-UP function. SSNR function reduces noise in the image, which essentially saves disk space when recording the video. The camera is also equipped with a mechanically switching IR cut filter (Infrared Cut filter Removal - ICR), which ensures accurate colors during the day, as well as a good representation of the gray scale at night. It also provides the opportunity to use the camera with external IR illuminators.
The camera allows to define up to four privacy zones. They are parts of the picture that are not visible to the operator. The PH-10H camera uses a new type of privacy zones - spherical masks - the size of which increases with the zoom. It is the only sensible solution for PTZ cameras.
Main features and functions of the camera:
  • PTZ:
    • maximum rotation speed (pan&tilt) - 360o/s;
    • motion vector method ensures the fastest path, minimizing motion time;
    • slow motion function - 0.5o/s - allows for precise targeting of the camera to an object;
    • possibility to control up to 255 such cameras via RS-485 interface;
    • supported protocols: Pelco-P, Pelco-D;
  • OSD menu
    • easy to use and transparent OSD menu allows to configure the camera and view its status;
    • possibility to program up to 127 presets with individual parameters such as white balance, auto exposure etc.;
    • possibility to define up to 8 "shuttle" programs - the camera moves between two selected points with constant speed;
    • possibility to use up to 4 trajectory patterns recorded during manual operations;
    • possibility to define up to 8 groups of tasks with stored sets of presets, trajectory patterns, shuttle programs;
    • possibility to setup 4 privacy zones.
After removing the dome the installer gets access to micro-switches used to change the protocol and number of the camera. A detailed description of the camera configuration can be found in its manual.
The camera has been equipped with outdoor housing (IP66). The set includes wall bracket (170 x 120 x 80 mm). The camera is powered from the included external power supply (output: 12 VDC / 2A).
Specifications:
Name: PH-10H
Code: M1192
Image sensor: 1/4'' Sony Interline Transfer CCD
Sensor resolution: 795 x 596
Video resolution (horizontally):

500 TVL (color)
570 TVL (B/W)
Sensitivity: 0.7 lx (color)
0.02 lx (B/W)
Lens: 3.8 - 38 mm / F1.8
Viewing angle: 5o to 50o
S/N ratio: 50 dB
Zoom: 10x - optical
10x - digital
Pan/tilt range: 360o - horizontal plane
180o - vertical plane
Number of presets: 127
Trajectory pattern learning: Yes
Control: RS-485
Protocols: Pelco-D, Pelco-P
Image settings: White balance, AGC, SSND, BLC, Focus
Selected functions:
  • 4 configurable privacy zones
  • Parking action - targeting the camera on a specific item or patrolling some areas in the absence of operator's activity during a  defined period of time
  • Power Up action - defining actions to be performed after switching on power
  • Sense-UP - increase of sensitivity
  • ICR - Infrared Cut filter Removal
  • SSNR (DNR) - noise reduction.
Power:  12 VDC / 2 A
Operating temperature: -10...+40oC
Dimensions: diam.141 x 140 mm
Weight: 1.2 kg

 

Specifications

Nazwa Język Typ pliku Wielkość pliku Data
Instrukcja obsługi kamery PL  0,6 MB  2011.07.02