Home Security IP Camera: Vimtag CP2 (720p, WiFi, IR, audio, microSD, PTZ)

View of the camera

View of the included accessories

View of the packaging

Are you wondering what your child is doing in the other room, or whether your old parents are OK, or your dog does not demolish your home when you are away? You can check it all with the Vimtag camera. The CP2 model is an IP / Wi-Fi camera ideally suited to home use as an electronic nanny, home video monitoring device or a simple video recorder. The HD resolution of the camera will allow you to record all the details, nothing can escape your attention! Thanks to the remote PTZ control, you do not have to worry about setting the camera in the best place. Using the dedicated application, you can change the field of view, capturing the entire room with one camera. This model can work both day and night thanks to the integrated infrared illuminator. The built-in speaker and microphone allow you to use the bi-directional audio function. With your smartphone, you can listen to what is happening around the camera, send a voice message or just talk like on a speakerphone. The free Vimtag app is dedicated to operate the camera using a computer or a smartphone. With this app you have control over everything, regardless of whether you are at home or far away from it. You always have full access to the camera from anywhere in the world. However, if you want a smaller model with a slim, elegant appearance, fixed field of view and Wi-Fi communication, pay attention to the CM1 K1552 camera.

The installation of an IP camera has never been so easy. If it is located near the router, you can use a wired connection. Just connect the camera to the router using the included network patch cable and plug in the power supply. If the distance from the router is not comfortable or you do not want to use any additional cable, you can use Wi-Fi connection and you need only to connect the power supply. To start using the camera, simply install the Vimtag application on your smartphone (dedicated either for Android devices or iOS phones), connect to the local network with the camera, scan its QR code and follow the instructions displayed. The whole process should take no more than several minutes.

To mount the camera, you don't need special tools. You can just put it on a stable surface, connect the cable(s) and it's ready. However, if you want to mount it permanently to a wall or the ceiling, you can use the dedicated bracket included in the set. The camera has the image rotation function, which allows it to work without problems in any position.

Do you want to observe the whole room with one camera? Nothing easier! The Vimtag CP2 camera enables smooth rotation up to 350° in the horizontal plane and up to 90° in the vertical plane. When leaving the home, you do not have to worry about setting the camera in the best place. Regardless of where you are, you have the option of changing the direction of view for accurate observation of the entire room. With this feature, nothing will escape your attention!

The Vimtag camera guarantees very good image quality both during the day and at night. It can work in three modes: automatic, day, night. In the automatic mode during the day, when the light intensity is sufficient, the camera operates in color mode. When the lighting level becomes too low, the camera will automatically turn on the infrared illuminator and switch to black and white mode. Thanks to this, you have the guarantee that nothing escapes your attention around the clock.

The camera has a slot for a microSD memory card and supports cards with a capacity of up to 128 GB. It can store recorded videos which you can watch anytime, anywhere. The card can also store videos and snapshots triggered by motion detection.

Thanks to a dedicated application for smartphones and tablets, many users can view the video at the same time. In the case of exceeding the output bandwidth of the camera in the local network, the communication will be carried out through the cloud. Just install the application on your devices and add the camera. You can also use a computer. All you have to do is to install the Vimtag application for the Windows operating system or connect to the camera via a web browser just by entering its IP address or logging in to your account.

Get notifications only when you want. The camera has three modes of notification settings: home, external and automatic. If you are at home and do not want to receive frequent notifications, you can use the home mode in which they are turned off. If you are away from home and want to receive notifications from motion detection, use the external mode. In automatic mode, you can specify the schedule when you want to receive possible notifications.

The motion detection function of the camera can be set to different sensitivity levels, independently for day and night, as well as for home and external operating modes. A motion detection event can trigger immediate notification on your mobile device, along with clear snapshots and videos. Every motion detection alert can be stored on the SD card to view it later.

If you want to listen to what is happening around the camera, communicate with your family, check if your child is asleep, give instructions to your beloved or anyone in the home, the Vimtag camera allows it all. With the built-in speaker and microphone and your smartphone running the app, you can set the speaker volume and microphone sensitivity so that the communication quality meets your expectations.

Vimtag company cares for the quality of its products and services by issuing software updates for the devices and applications. The updates of the firmware of the camera and the applications for mobile devices and PCs further extend the functionality of the system. The whole process is extremely simple, all you have to do is to go to the system tab in the application and click the update button. The camera software will be automatically downloaded and updated. When a new version of the mobile application appears, an alert will be displayed on your device. After acceptance, the update will be installed automatically.

Vimtag is a leading provider of intelligent home surveillance products and services around the world. Its offer includes mainly devices for home security, such as IP cameras operating on the basis of a cloud or intelligent storage systems. These solutions can be used in a convenient and safe way anywhere, anytime. The company's headquarters is located in Shenzhen, China, and its origins date back to 1996. The Vimtag brand is known in over 80 countries of the world. The company presents its devices at international fairs, such as IFA and COMEX. The development of the hardware and software solutions is supported by a team consisting of over 100 engineers, which ensures continuous improvement of the quality of the products.