EN
PL
CZ
DE
IE
HU
PT
RO
SK
€33.00
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €33.00 | 0 % | from 1 piece |
Available
The AWS-1243 (1 input, 3 outputs) is intended for use in RTV installations. The device has a possibility of powering preamplifiers with 12 V DC. Gain 24...26 dB.
• Inputs: 1: 87-790 MHz
• Number of outputs: 3
• Maximum gain: 26 dB
• Maximum output signal level: 104 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 3
• Maximum gain: 26 dB
• Maximum output signal level: 104 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
Details
The broadband amplifier AWS-1243 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To use this option it is needed to set the jumper (it is shown in enclosed instructions).
A 12 V 250 mA stabilised power supply with a 3.5 jack connector is included, although it is also possible to provide power via the amplifier output (using an isolator, e.g. C0397, with the power supply included with the amplifier).
Note! In the case of remote power supply, the maximum power supply current must be calculated, taking into account the preamplifiers used. The AWS-124x series includes one, two, three and four output amplifiers. Compared to the older AWS-24x series, the gain control has been changed, which now takes place between the amplifier stages, which has a very positive effect on the noise characteristics (in the previous version, the control was at the input).
The AWS-124x amplifiers are put into Zn-Al cast housings that guarantee excellent shielding effectiveness and good look. The amplifiers are not prepared for outdoor operation or in places with high humidity.
Specifications
| Product type | Home repeater | ||
| Model | AWS-1243 | ||
| Brand | AMS | ||
| type | RF TV/CATV | ||
| Applications | Indoor | ||
| Operating band | FM/VHF/UHF | ||
| Inputs/Outputs | input count | 1 | |
| Inputs/Outputs | number of outputs | 3 | |
| DC 0/12 V switch | Yes | ||
| Gain control | Yes | ||
| Gain parameters | |||
| Input 1 | Frequency | 87...790 | |
| Input 1 | Gain | dB | 21...28 |
| Gain control | dB | 0...10 | |
| Preamplifier power supply | V/A | DC 12/0.1 | |
| Precorrection of cable characteristics | No | ||
| Device specifications | |||
| Max. output level | dBµV | 96 | |
| Inner noise | VHF | dB | 4 |
| Inner noise | UHF | dB | 4 |
| Die-cast enclosure | Yes | ||
| Built-in LTE filter | LTE 800 | ||
| Signal connector type | F | ||
| RF test output | No | ||
| Power supply | V | DC 12 | |
| V/A | DC 12/0.25 | ||
| Current drawn | A | 0.15 | |
| Remote power supply | 12 VDC | ||
| Operating temperature | °C | -25...+55 | |
| Dimensions | mm | 125 × 88 × 26 | |
| Weight | kg | 0.3 | |
