English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
This product is no longer available
Replacements
Support
Details
Front view
Rear view
The ULTIPOWER 114P-4POE-20 Ethernet industrial switch enables data transmission at rates of 10 Mbps and 100 Mbps. Its four RJ45 ports support auto-negotiation and Power over Ethernet (PoE) functions. The device automatically discoveries PD devices (Power Device) compliant with IEEE 802.3af standard and supplies power to them. This way, it is easy to power network devices located in places without access to AC lines, such as access points, IP cameras, IP phones etc. The switch has been equipped with optical converter allowing for transmission over a distance up to 20 km.
ULTIPOWER 114P-4POE-20 belongs to the group of industrial switches, capable of reliable operation in harsh environmental conditions like increased dust levels, high or low temperature, high humidity. Such switches should also be mounted in hermetic enclosures installed on poles or other structures located outdoors. The ULTIPOWER switches are equipped with Ethernet ports (Fast Ethernet or Gigabit Ethernet, depending on the model) for connecting IP cameras, computers etc. The ULTIPOWER industrial switches are protected by housings with IP40 ingress protection rating (against solid foreign objects greater than 1 mm in diameter). All the Ethernet PoE ports can power the connected devices (after supplying the switch with 48-50 VDC). Each of the industrial switches has been equipped with optical module converting the transmission medium into fiber.
Key features
- IP40 ingress protection rating
- Power: 12-48 VAC or 24VAC
- Possibility of connecting two power supplies (the main and redundant)
- Power consumption <6W (without PoE),
- 4x FastEthernet 10/100 Mbs PoE ports
- Optical transmission: 2x SC 100 Mbps (single mode)
- ESD protection: 6 kV
- Operating temperature range: -40℃...80℃
- Operating humidity range: 5...95%
- Permissible atmospheric pressure: 80...110 kPa
- Insulation resistance: >100 MΩ
- DIN-rail mounting option
Standards
- Electrical insulating qualities
- Dielectric strength test - GB/T13729-2002 AC 2 kV (<1 min)
- Insulation resistance >100 MΩ - GB/T13729-2002
- Rated impulse withstand voltage (GB/T13729-2002): 5 kV (in 230 VAC part), 1 kV (in <50 V part)
- Mechanical properties
- Reaction to vibrations: GB /T15153.1-1998 (IEC870-2-1: 1995)
- Reaction to shocks: GB/T14537-1993
- Electromagnetic compatibility
- Radiated EMI immunity tests： GB/T15153.1-1998 (IEC870-2-1: 1995)
- Tests of immunity to series of electrical fast transients: GB/T17626.4-1998 (IEC61000-4-4:1995)
- Surge immunity tests: GB/T17626.5-1999 (IEC 61000-4-5:1995)
- Conducted EMI immunity tests: GB/T17626.6-1998 (IEC 61000-4-6:1996)
- Magnetic field immunity tests: GB/T17626.8 1998 (IEC 61000-4-8:1993)
Example application diagram
Specifications:
| Name | ULTIPOWER 114-2POE-20 |
| Code | N29972 |
| Standards and protocols | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3x Flow control IEEE 802.1Q VLAN IEEE 802.3af |
| Functions | PoE IEEE 802.3af |
| Frame forward rate | 10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port |
| Transmission method | Store-and-Forward |
| Ports | 4x RJ45 10/100Mbps PoE 1x FO 2x SC 20 km SM |
| Network cabling requirements | 10Base-T: UTP cat. 3, 4 or 5 (up to 100 m) STP EIA/TIA-568 100 Ω (up to 100 m) 100Base-Tx: UTP cat. 5 or 5e (up to 100 m) STP EIA/TIA-568 100 Ω (up to 100 m) |
| LED indicators | PWR1, PWR2, F1, POE |
| ESD immunity | < 6 kV |
| Dimensions [mm] | 50x156x135 |
| Operating environment | Operating temperature range: -40...80℃ Operating humidity: 5...95% (no condensation) |
| Power | 12-48 VDC, 24 VAC (possibility of using two power supplies for redundancy) |
