This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

Industrial PoE Switch: ULTIPOWER 124P-4POE-20 (4xFE PoE, 2xFO SC, 100Mbps 20 km)

Code: N29973
This product is no longer available
Replacements
Industrial PoE Switch: ULTIPOWER 152SFP 802.3af/at (5xRJ45 incl. 4xPoE FE, 2xSFP 100M, Extended, VLAN, PoE Auto Check) Code: N299701
Estore: Library:

Support

  • Write to us!

Details

LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
Front view
LAN Adapter: PCI NIC TP-Link TG-3269 10/100/1000 Mbps
Rear view
The ULTIPOWER 124P-4POE-20 Ethernet industrial switch enables data transmission at rates of 10 Mbps and 100 Mbps. Its four RJ45 ports support auto-negotiation and Power over Ethernet (PoE) functions. The device automatically discoveries PD devices (Power Device) compliant with IEEE 802.3af standard and supplies power to them. This way, it is easy to power network devices located in places without access to AC lines, such as access points, IP cameras, IP phones etc. The switch has been equipped with two optical ports allowing for transmission over a distance up to 20 km.
ULTIPOWER 124P-4POE-20 belongs to the group of industrial switches, capable of reliable operation in harsh environmental conditions like increased dust levels, high or low temperature, high humidity. Such switches should also be mounted in hermetic enclosures installed on poles or other structures located outdoors. The ULTIPOWER switches are equipped with Ethernet ports (Fast Ethernet or Gigabit Ethernet, depending on the model) for connecting IP cameras, computers etc. The ULTIPOWER industrial switches are protected by housings with IP40 ingress protection rating (against solid foreign objects greater than 1 mm in diameter). All the Ethernet PoE ports can power the connected devices (after supplying the switch with 48-50 VDC). Each of the industrial switches has been equipped with optical module converting the transmission medium into fiber.
Key features
  • IP40 ingress protection rating
  • Power: 12-48 VAC or 24VAC
  • Possibility of connecting two power supplies (the main and redundant)
  • Power consumption <6W (without PoE),
  • 4x FastEthernet 10/100 Mbs PoE port
  • Optical transmission: 2x FO SC 100 Mbps single mode
  • ESD protection: 6 kV
  • Operating temperature range: -40℃...80℃
  • Operating humidity range: 5...95%
  • Permissible atmospheric pressure: 80...110 kPa
  • Insulation resistance: >100 MΩ
  • DIN-rail mounting option
Standards
  • Electrical insulating qualities
    • Dielectric strength test - GB/T13729-2002 AC 2 kV (<1 min)
    • Insulation resistance >100 MΩ - GB/T13729-2002
    • Rated impulse withstand voltage (GB/T13729-2002): 5 kV (in 230 VAC part), 1 kV (in <50 V part)
  • Mechanical properties
    • Reaction to vibrations: GB /T15153.1-1998 (IEC870-2-1: 1995)
    • Reaction to shocks: GB/T14537-1993
  • Electromagnetic compatibility
    • Radiated EMI immunity tests： GB/T15153.1-1998 (IEC870-2-1: 1995)
    • Tests of immunity to series of electrical fast transients: GB/T17626.4-1998 (IEC61000-4-4:1995)
    • Surge immunity tests: GB/T17626.5-1999 (IEC 61000-4-5:1995)
    • Conducted EMI immunity tests: GB/T17626.6-1998 (IEC 61000-4-6:1996)
    • Magnetic field immunity tests: GB/T17626.8 1998 (IEC 61000-4-8:1993)
Industrial PoE Switch: ULTIPOWER 112P-2POE-20 (2xFE PoE, 1xFO SC, 100Mbps 20 km)Industrial PoE Switch: ULTIPOWER 124P-4POE-20 (4xFE PoE, 2xFO SC, 100Mbps 20 km)Industrial PoE Switch: ULTIPOWER 112P-4POE-20 (4xFE PoE, 1xFO SC, 100Mbps 20 km)
Example application diagram

Specifications:
Name ULTIPOWER 124-4POE-20
Code N29973
Standards and protocols IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3x Flow control
IEEE 802.1Q VLAN
IEEE 802.3af
Functions

PoE IEEE 802.3af
MAC auto-learning and auto-aging
Bandwidth control for full duplex  (IEEE802.3x), back pressure control (half-duplex)
Frame forward rate
 10BASE-T: 14880pps/port
100BASE-TX: 148800pps/port
Transmission method
 Store-and-Forward
Ports 4x RJ45 10/100Mbps PoE
2x FO 2x SC 20 km SM
Network cabling requirements
 10Base-T:
UTP cat. 3, 4 or 5 (up to 100 m)
STP EIA/TIA-568 100 Ω (up to 100 m)
100Base-Tx:
UTP cat. 5 or 5e (up to 100 m)
STP EIA/TIA-568 100 Ω (up to 100 m)
LED indicators
 PWR1, PWR2, F1, POE
ESD immunity
 < 6 kV
Dimensions [mm] 50x156x135
Operating environment
 Operating temperature range: -40...80℃
Operating humidity: 5...95% (no condensation)
Power 12-48 VDC, 24 VAC (possibility of using two power supplies for redundancy)

Specifications

Nazwa ULTIPOWER 124-4POE-20
Kod N29973
Standardy i protokoły IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3x Flow control
IEEE 802.1Q VLAN
IEEE 802.3af
Funkcje

Zasilanie urządzeń PoE IEEE 802.3af
Obsługa funkcji auto-learning i auto-aging MAC
Wsparcie standardu kontroli przepustowości dla trybu pełnego dupleksu (IEEE802.3x) oraz funkcji back pressure dla trybu pół dupleksu
Szybkość przekierowań 10BASE-T: 14880pps/port
100BASE-TX: 148800pps/port
Metoda transmisji Store-and-Forward
Porty 4 porty RJ45 10/100Mb/s  w tym 4 porty PoE
2x FO 2x SC jednomodowy 20 km
Okablowanie sieciowe 10Base-T:
Kabel UTP kat. 3, 4 lub 5 (do 100m)
Kabel STP EIA/TIA-568 100Ω (do 100m)
100Base-Tx:
Kabel UTP kat. 5, lub 5e (do 100m)
Kabel STP EIA/TIA-568 100Ω (do 100m)
Wskaźniki LED PWR1, PWR2, F1, POE
Zabezpieczanie przed wyładowaniami elektrostatycznymi <6kV
Wymiary [mm] 50x156x135
Środowisko pracy Dopuszczalna temperatura pracy: -40...80℃
Dopuszczalna wilgotność powietrza:  5...95% (bez kodensacji pary wodnej)
Zasilanie 12-48 V DC, 24 V AC (możliwość podłączenia dwóch zasilaczy - redundantne zasilanie)