English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
€0.48
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €0.48 | 0 % | from 1 piece |
Available
SCAPA 2702 is a 0.13mm thick, lead free, self-extinguishing, plasticized PVC insulation tape using an aggressive pressure-sensitive rubber-based adhesive system. This premium quality product is manufactured in Europe by ***SCAPA GROUP plc***www.scapa.com*** according to international standards and with focus on environmental safety.
Details
SCAPA 2702 (E9823) is a 0.13mm thick, lead free, self-extinguishing, plasticized PVC insulation tape using an aggressive pressure-sensitive rubber-based adhesive system. This premium quality product is manufactured in Europe by SCAPA GROUP plc according to international standards and with focus on environmental safety.
Distinguishing features of the PVC tape:
- High quality materials ensure maximum longevity;
- Aggressive pressure-sensitive rubber-based adhesive system ensure good adhesion to the substrate;
- High elasticity and (180%) and tensile strength (25N/cm)
- Self-extinguishing PVC;
- Good resistance to abrasion, corrosion and moisture;
- High dielectric strength;
- Approved by IMQ i VDE*;
- Conforms to BS3924;
- Operating temperature: 0
* The VDE is Der Verband der Elektrotechnik, Elektronik und Informationstechnik (the German Association for Electrical, Electronic and Information Technologies), a professional body based in Frankfurt am Main, Germany. VDE Certification Marks are known and respected around the world. The VDE Mark indicates conformity with the VDE standards or European or internationally harmonized standards and confirms compliance with protective requirements of the applicable EC Directive(s).
APPLICATIONS:
- electrical cables wrapping,
- color coding,
- cable sealing,
- protection for low and medium voltage (max 600V) cable splices.
RECOMMENDATIONS:
Rolls should be stored flat in the original packaging. They have to be protected from dust, heat, moisture, direct sunlight and solvent fumes. The storage temperature should be between +10oC and +25oC.
The tape should be applied with sufficient tension to ensure an optimum bonding and minimum of two layers with a half overlap. The final layer should be wrapped with a lower tension to prevent flagging effects.
The surfaces should be clean, dry, free of dust, grease, oil or other contaminants.
Rolls should be stored flat in the original packaging. They have to be protected from dust, heat, moisture, direct sunlight and solvent fumes. The storage temperature should be between +10oC and +25oC.
The tape should be applied with sufficient tension to ensure an optimum bonding and minimum of two layers with a half overlap. The final layer should be wrapped with a lower tension to prevent flagging effects.
The surfaces should be clean, dry, free of dust, grease, oil or other contaminants.
Specifications
| Product type | Insulating tape | ||
| Manufacturer | SCAPA | ||
| Color | red | ||
| Length | m | 10 | |
| Width | mm | 15 | |
| thickness | mm | 0,13 | |
| Puncture resistance | Test method: ASTM D149 | kV/mm | 40 |
| Temperature range of the system | Test method: CEI EN 60454 | °C | 0...+90 |
| Elongation at break | Test method: CEI EN 60454 | % | 180 |
| Breaking force | Test method: CEI EN 60454 | N/cm | 25 |
| Flammability | Test method: CEI EN 60454 | Self-extinguishing | |
