IP Dome Camera: Signal HDV-200 (2MP, 2.8-12mm, 0.01 lx, IR up to 30m, H.265/H.264)

Code: K1816
This product is no longer available
Estore: Library:

Support

Details

IP Dome Camera: Signal HDV-200 (2MP, 2.8-12mm, 0.01 lx, IR up to 30m, H.265/H.264)
View of the camera
IP Dome Camera: Signal HDV-200 (2MP, 2.8-12mm, 0.01 lx, IR up to 30m, H.265/H.264)
View of the connectors
IP Dome Camera: Signal HDV-200 (2MP, 2.8-12mm, 0.01 lx, IR up to 30m, H.265/H.264)
View of the included accessories
Key features
  • 2 MP image resolution: 1920 x 1080
  • Sensitivity of 0.01 lx in color mode
  • Video processing functions: 3D DNR, WDR, BLC,
  • 2.8 - 12 mm varifocal lens providing 90° - 26° viewing angle
  • Built-in IR illuminator with range up to 30 m
  • Mechanical ICR filter
  • H.265, H.264, MJPEG video compression
  • Management through Internet Explorer, Firefox or free CMS software
  • Support for ONVIF protocol (S profile)
  • Supply voltage: 12 VDC
Signal HDV-200 ceiling IP camera employs 1/2.8" SONY CMOS image sensor with a resolution of 1920x1080 pixels (2 MP) and can provide video at frame rate up to 25 fps. The built-in 2.8-12 mm varifocal lens has viewing angle adjustable within 90° - 26° range. It cooperates with IR illuminator with range up to 30 meters, ensuring good video coverage in low light conditions and complete darkness. The camera can provide three independent video streams and offers three compression methods, H.265/H.264/MJPEG. The camera is intended for indoor or outdoor applications - its IP66 rated housing protects the electronics against adverse weather conditions. The camera is conventionally powered from a 12 VDC source.
The camera can use H.265, H.264 and MJPEG compression methods. The H.265 coding allows for two times higher compression ratio than H.264 with preservation of the image quality. This further saves network and memory resources. The selected type of compression must be supported by the NVR.
The configuration and operation control of the camera is performed via Internet Explorer, firefox or the included free CMS software. IPCSearcher application is used for searching Signal cameras in IP network, configuring network parameters, firmware updating, and changing parameters of the cameras and Signal NVRs. The application is particularly useful during the initial configuration of any video monitoring system with multiple cameras. FreeIP application that can be downloaded for Android or iOS mobile devices allows for remote monitoring of the surveillance video.
Specifications
Name HDV-200
Code K1816
Standard IP
Housing type Dome
Compression H.265/H.264/MJPEG
Resolution 1920 x 1080 (2 MP)
Multi-stream operation Yes
Frame rate 25 fps at 1920 x 1080 and lower res.
 
Image sensor 1/2.8" Sony Progressive Scan CMOS
IMX290 + S3L33M
Sensitivity 0.01 lx in color mode
S/N >52 dB
Lens (focal length) 2.8 - 12 mm
Horizontal viewing angle 90o - 26o
IR range Up to 30 m (*)
IR LEDs 14µ x 24
ICR Yes
Video processing 3D DNR, WDR, BLC, FLK
Automatic/Fixed Automatic/Fixed
Alarm events Motion detection
Network interface RJ-45 10/100Base-T
Protocols
IPv4, HTTP, TCP/IP, FTP, NTP, RTSP, UDP, SMTP, DNS, DDNS
ONVIF compliance Yes (v2.4)
Supported languages English, French, German, Hungarian, Spanish, Italian, Polish, Portuguese, Romanian, Turkish
Supported browsers IE, Firefox
Client software HeroSpeed CMS
Mobile apps FreeIP (Android, iOS)
English, Chinese
IP rating
IP66
Power 12 VDC (±10%)
Current consumption
700 mA (max)
Power consumption
8.4 W (max, with IR)
Installation temperature range -20°C...60°C (RH max 95%)
Dimensions Φ131 x 93 mm
Weight 0.8 kg
(*) - the IR reflector range depends on the type of illuminated objects/surfaces (reflectance in the infrared range).