English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Support
Details
Front view
Rear view
The included accessories
Hikvision DS-7604NI-E1/A is a modern IP network video recorder capable of monitoring, recording and playing back images from 4 IP cameras of megapixel resolutions at frame rates up to 25 fps from each camera. This standalone NVR with VGA and HDMI outputs can be directly connected to a monitor, without a need for an additional computer. Thanks to embedded Linux OS, the NVR ensures stable operation and resistance to computer viruses.
The local recording and network transmission uses H.264 or H.264+ compression that provides good image quality with relatively small bandwidth and disk space consumption. H.264+ allows for higher compression ratios in the case of less dynamic scenes, preserving image quality similar to H.264. There is place for one SATA HDD with total capacity up to 4 TB. In addition, the NVR supports NAS (NFS) and SAN (iSCSI) disk arrays. The option of automatic overwriting of existing material prevents loss of the current data. Built-in USB ports can be used for control of the NVR via external devices and for connecting a USB storage device, usually to copy some data.
A new menu of the DVR has been designed in a manner that helps everyone, even novice users, navigate and make changes to the settings. Both the layout of commonly used functions and graphic design meet the highest current standards. Support for Opera and Safari web browsers eliminates the need for installing/using ActiveX controls.
Browsing the archives locally, the user can simultaneously play them back from all 4 channels. To quickly localize the interesting moment/period, the video records are presented on timelines (24 hours). The playback can be started just by clicking on a point on a timeline.
IP CCTV systems based on Hikvision IP cameras and NVRs can be configured for continuous recording with special parameters in the case of specific events. Each channel can be configured individually in this aspect. It is possible to increase the frame and bit rates, independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering etc), the NVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second of the period with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less space on the storage media.
HIKVISION NVRs in IP networks can be controlled via IVMS 4200 software. The software allows for configuration and management of NVRs/DVRs and IP cameras. The iVMS 4200 utility can remotely manage up to 256 NVRs/DVRs. The user accounts can have different access/management rights, from the highest level of "administrator" to individually limited "guest" levels.
Key features:
- Max total bandwidth (from all cameras): 40 Mbps
- Stable operation
- Support for IE, Opera, Safari
- Simultaneously operating HDMI, VGA outputs
- HDMI/VGA monitor output up to 1920x1080
- H.264+/H.264 video compression
- Searching by motion detection and alarm events
- Digital zoom
- Synchronized playback of 4 channels simultaneously
- Possibility of continuous recording with special parameters in the case of specific events (only for Hikvision cameras)
- Support for IPv6
- 4 alarm inputs / alarm output
- Monitoring of the status of LAN, cameras, HDD
Compression:
- H.264+, H.264
- Watermark
- Ability to set recording parameters for each channel, including image resolution and quality, bit rate
- Audio-video synchronization
Local monitoring
- Screen division or sequential image displaying
- Up to 4 privacy zones for each camera
- Presets and patrol paths and for PTZ cameras
- PTZ control via mouse by selecting some area of the image
- Possibility of setting a timetable for patrol paths and starting points for PTZ cameras
- Detection of video loss, motion detection in predefined areas of images
- Quick playback option
Disk management
- Place for one SATA HDD up to 4 TB
- Support for up to 8 NAS drives (8 x NAS or 7x NAS +1x IP SAN)
- Disk group management
- S.M.A.R.T. hard disk monitoring
- Option of overwriting existing data
Recording and playback
- Multiple recording modes, including manual, scheduled or triggered by motion detection
- 8 periods of scheduled recording, individually configurable for each camera
- Pre and post alarm options
- Searching options include selection of date and time, channel, kind of recording (event)
- Ability to set different recording parameters for alarm events
- Timelines
- Local playback of all channels simultaneously
- Markings for quick searching of selected recordings
- Digital zoom during live monitoring and playback
- Defining image parameters for specific events
- Reverse playback
Alarms
- Exceptions include: disk overflow, disk failure, network failure, video loss, video incompatibility, IP conflict
- Alarm response actions include: displaying full screen image from the active channel, beep, email notification
- Possibility of scheduling alarm activation periods
Network operation
- Built-in 10/100/1000 Mbps Ethernet card
- Support for IE, Opera, Safari
- Support forTCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI protocols
- Possibility of remote control, downloading of recordings via the network, remote search/playback/archiving
- Remote configuration of parameters
- Remote import/export of settings
- Remote monitoring of the device status, alarms, log
- Possibility of remote disk management, remote firmware update, remote operation control
- Remote recording control (switching on/off)
- Screenshot recording option
Other features:
- Control via USB mouse or remote, front panel buttons, dedicated keypad
- Ability to create user accounts with different access/management rights
- System log recording all events; easy way to find events according to main categories: alarms, exceptions, operations etc.
- Starting and stopping alarms manually or automatically
- Ability to save and import/export DVR settings
Specifications:
| Name/model | Hikvision DS-7604NI-E1/A |
| Code | K22043 |
| Standard | IP |
| Operating system | Embedded Linux |
| Number of channels | 4 |
| Max input data stream | 40 Mbps |
| Max output data stream | 80 Mbps |
| HDD | 1x SATA II (max 4 TB) |
| Pentaplex | Simultaneous live monitoring, recording, playback, backup and remote access |
| System monitoring | External alarm, motion detection, tampering, recording failure, disk failure, disk overflow, IP network failure, IP address conflict, unauthorized login attempt |
| Alarm actions | Recording start, sound notification, email notification, monitoring center alert, PTZ preset tour |
| Playback | Directly from NVR: 4 channels (1080p) |
| Supported camera brands | ACTI, Arecont, Axis, Bosh, Brickom, Canon, Panasonic, Pelco, Samsung, Sanyo, Sony, Vivotek, Zavio; (ONVIF or PSIA) |
| Port Ethernet | 10/100/1000 Base-TX (RJ-45) |
| Video compression | H.264+, H.264 |
| Recording modes | Continuous, schedule, manual, alarm triggered; |
| Digital zoom | Any part of the image to full screen size |
| Protocols | TCP, UDP, RTP, DHCP, DDNS, SMTP, NTP, PPPoE, SADP, SNMP, NFS, iSCSI, UPnP, IPv6, ONVIF, PSIA, RTSP |
| Backup | External storage device via USB; PC or network drive via LAN |
| Client app (Windows, Mac) | iVMS - 4200 (PCs) iVMS - 4500 (smartphones) |
| Audio input/output | 1 / 1 (two-way voice communication, the input signal is not recorded) |
| Alarm input/output | 4/1 |
| Video outputs | HDMI, VGA (D-Sub) |
| Other interfaces | 1 x USB 2.0, 1 x USB 3.0 |
| Operating temperature | -10°C ... 55°C |
| Supplying voltage | 12 VDC (AC/DC adapter incl.) |
| Power consumption | <10 W (without an HDD) |
| Mobile access | Android, Symbian, WindowsMobile, iPhone, BlackBerry |
| Compatible browsers | IE, Google Chrome, Opera, Safari |
| Dimensions (WxDxH) | 315 x 230 x 45 mm |
| Weight | < 1 kg |
