This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

IP Watchdog Signal (2 channels)

Code: N3412
This product is no longer available
Estore: Library:

Support

Any questions or comments?

  • Write to us!

Details

IP Watchdog Signal (2 channels)
Front view
IP Watchdog Signal (2 channels)
Rear view

IP Watchdog Signal (2 channels)
The included accessories

The device with two AC power outlets allows remote control of the outlets via the Internet - switching on/off the connected devices. It has the ability to automatically monitor the connected network devices (the monitoring is based on PING function) - in the absence of a response the connected device is turned off or reset.
Key features:
  • Remote switching on/off the connected devices
  • Automatic monitoring of the connected network device(s), using PING function - in the absence of a response the device is turned on/off or reset
  • Action delay option
  • Action alert option (by email)
  • Configuration of startup default values (each output on or off)
  • Reliable built-in hardware watchdog
  • MAC address changer
  • DHCP client
  • PPPoE support
  • NTP client
  • Supplying voltage: 110 VAC or 230 VAC
The device is ideal for base stations, which have to ensure stable long-term operation. In the case of a hang-up, the base station can be remotely reset via the Internet by switching off and on the power supply controlled by the IP watchdog.

Typical applications:
  • Switching on/off light;
  • Opening gates, switching on/off cameras, IR illuminators etc.;
  • Remote switching on/off various equipment;
  • Switching on various equipment for a specified period;
  • Periodical switching on/off various equipment;
  • Remote reconfiguration/rebooting of network equipment.
All configuration and management can be done from anywhere in the world via the Internet.
Configuration of the device is performed via a web browser - the user can set actions such as:
  • Manual switching on/off or reset (switching off and on) of a device plugged to any output.
  • Automatic test of the attached network equipment with the use of PING function. This function is based on sending ICMP packets in order to obtain a response from the tested device. In the absence of a response, an adequate action is taken (switching off and on of the dedicated power output - reset).
Specifications:
Name IP Watchdog Signal (2 channels)
Code N3412
Number of power outputs 2
Configuration interface web browser
Certificate
 CE
Dimensions [mm] 100x100x44
Total output current (of both outlets)
 15 A (110 VAC) or 10 A (230/240 VAC)
Supplying voltage 110 VAC or 230/240 VAC

 

Specifications

Nazwa Watchdog 2-portowy Signal
Kod N3412
Ilość gniazd wyjściowych 2
Konfiguracja przez przeglądarkę internetową
Certyfikat CE
Wymiary [mm] 100x100x44
Parametry wejściowe (sumaryczne) 15A/110V AC lub 10A/240V AC
Zasilanie 110V AC lub 230V AC