IPTV streamer 8xDVB-S2X/S2/S-IP sdi482C with dual CI slot and USB port TERRA

Code: R81594
Price Disc. Quantity Validity
€551.29 0 % from 1 piece
The sdi482c IPTV streamer is a device that enables the conversion of a DVB-S2X/S2/S signal (coded channels) into an IP multicast stream with a maximum bandwidth of 0.6 Gbps.
• Conversion of DVB-S2X/S2/S signals (coded programs) to IP stream
• 2 CI slots
• Reception of DVB-S2X/S2/S signal from 8 satellite transponders
• Support single-cable dSCR/Unicable standard (EN50494, EN50607)
• USB connector enabling playback of source material in .ts format
• IP multicast stream with a maximum bandwidth of 0.6 Gbps - low use of LAN resources
• Possibility to watch TV on PCs and laptops with free software installed


4-year warranty.



IPTV streamer 8xDVB-S2X/S2/S-IP sdi482C R81594 with double CI slot (coded channels) is one of the modules that enables the distribution and management of the DVB-S2X/S2/S satellite TV offer via the Ethernet network (LAN) based on twisted-pair cable. The IP stream available at the output is fed into the LAN and delivered to end receivers - most often using switches. The multicast technique used in this type of systems allows for significant savings in network resources. Additionally, the sdi482c R81594 module enables streaming of source material in the MPEG-2 TS (Transport Stream) format located on an external USB drive.
Thanks to television distribution technology based on IP, the cabling in a building can be limited only to one (data + IPTV) or two (separate for data and for IPTV) UTP/FTP cable(s). In addition to low cost of such cabling, the users get access to additional interactive features, and the programming can be adapted to their specific requirements.
One of the main advantages of the Terra IPTV solution is no need for any middleware software between the headend and the receivers. As a result, the system is much cheaper (no software license fees) than other solutions and very simple in both configuration and operation. A unique feature of the system is the fact that the terminal units - R81612 IPTV receivers - do not require any configuration, which can be of great importance in the case of larger networks. They automatically detect any changes in the local network or the programming.
Key features:
  • conversion of DVB-S2X/S2/S signals (coded programs) to IP stream,
  • support for the single-cable dSCR/Unicable standard (EN50494, EN50607) - ability to connect the DVB-S2X/S2/S signal with one cable from the SRM522 R80522 multiswitch
  • conversion of DVB-S2X/S2/S signal from 8 satellite transponders (1 panel),
  • USB connector enabling playback of source material in .ts format
  • IP multicast stream with a maximum bandwidth of 0.6 Gbps - low use of LAN resources,
  • possibility to create thematic (or e.g. language) lists of channels automatically detected by receivers,
  • possibility of watching TV on PCs and laptops with free software installed,
  • using twisted-pair cable as a transmission medium,
  • easy transmission of TV signals over long distances (fiber optics),
  • redundant power supply, low power consumption for the headend,
  • unique communication protocol allowing for full automatic receiver configuration.
Attention! For proper operation of the TV installation based on the IP stream, it is necessary to use Ethernet managed switches with the IGMP snooping v2 function, which enables control of the transmission of multicast packets.
Example of mounting TERRA headend to CD001 housing with DIN rail BD001 R90001. Additionally, there are the SRM-522 R80522 multiswitch and an Ethernet switch mounted on the ID001 R90003 mounting plate. The whole system has the FD001 R90002 ventilation unit with thermostat added.
Streamer sdi482c R81594 equipped with 1 RF input enabling the reception of encoded programs (2 CI slots) in the DVB-S2X/S2/S standard. Thanks to the use of dSCR (Unicable II) technology, one coaxial cable from the SCR/Unicable SRM-522 R80522 series multiswitch can be connected to the sdi482c module and receive 8 satellite transponders from any polarization/band pair.
---The "Input settings" window allows to select up to 8 satellite transponders from any polarization/band pair. Additionally, information about the satellite signal level RF level and the Link Magin. parameter --
The "Transport streams" window is used to individually configure the output streams after previously scanning the input stream. Up to 512 TV/radio programs with individual multicast addresses, 8 MPTS streams.
For coded channels, we can install two CAM CI modules (no support for CI+) with decoding cards.
Example of a DVB-S2X/S2/S installation using fiber optic media.


Product type Streamer IP
Name sdi482c
Input standard DVB-S2X/S2/S
RF input number of transponders 8
Frequency range MHz 950...2150
Power supply/control 0/13/18 V & 1 A max. DiSEqC 1.0, EN50494, EN50607
signal level, AGC dBµV 45...85
Impedance Ohm 75
Channels Coded (CI slot) TAK (2x)
Specyfikacja techniczna
Output standard IP
IP output transmission protocol UDP/RTP, SAP/SDP
multicast Yes
Wyjście IP przepustowość Mbit/s 600
IP output MPTS Yes
Configuration Port RJ-45
IP address
Remote Yes
Power supply V/A DC 12/0,1 A
Operating temperature °C 0...+50
Weight kg 0,97
Dimensions mm 48,5 × 198 × 112