IPTV Streamer: TERRA sdi-410C (DVB-S/S2 to IP, CI slot)



IPTV Streamer: TERRA sti-410C (DVB-T/T2/C to IP, CI slot)
IPTV Streamer: TERRA sti-410C (DVB-T/T2/C to IP, CI slot)
IPTV Streamer: TERRA sti-410C (DVB-T/T2/C to IP, CI slot)
Views of the sdi 410C R81608 IPTV DVB-S/S2 to IP streamer

IPTV Streamer: TERRA sti-410C (DVB-T/T2/C to IP, CI slot)
View of the included accessories - wall mount, distance lath, RF bridge, termination load resistor
Key features
  • conversion of DVB-S/S2 signal to IP stream,
  • multidescrambling (pay-TV channels - CI slot),
  • conversion of channels from one transponder, max 24 channels (1 module),
  • possibility of creating thematic lists (e.g. channels in the same language) that are automatically detected by receivers,
  • possibility of watching TV on PCs, laptops etc. running free app,
  • IPTV receivers have recording option and access to some web services (YouTube etc),
  • use of twisted-pair cables as the transmission medium,
  • easy way to extend the transmission range (through the use of media converter and optical fiber),
  • low power consumption, power redundancy,
  • IP multicast technique saving LAN resources,
  • unique communication protocol allowing fully automatic configuration of IPTV receivers.
The sdi-410C R81608 IPTV DVB-S/S2 to IP streamer allows for the selection of satellite channels and their distribution via Ethernet (LAN) network based on twisted-pair cabling. The output IP stream is usually provided to IPTV receivers via network switches. The use of multicast technique considerably saves the network resources.
Thanks to television distribution technology based on IP, the cabling in a building can be limited only to one (data + IPTV) or two (separate for data and for IPTV) UTP/FTP cable(s). In addition to low cost of such cabling, the users get access to additional interactive features, and the programming can be adapted to their specific requirements.
One of the main advantages of the Terra IPTV solution is no need for any middleware software between the headend and the receivers. As a result, the system is much cheaper (no software license fees) than other solutions and very simple in both configuration and operation. A unique feature of the system is the fact that the terminal units - R81612 IPTV receivers - do not require any configuration, which can be of great importance in the case of larger networks. They automatically detect any changes in the local network or the programming.
RF input parameters of sdi-410c R81608 streamer: 1 transponder DVB-S/S2 (1 MPTS Multiple Program Transport Streams)
View of the information window of the sdi-410c R81608 module, including the most important parameters such as input level in dBμV, SNR, VBER.
The "Output streams" window is used to configure the output streams individually after scanning the input stream. The capacity is up to 24 TV/radio channels with individual multicast addresses, one MPTS stream.
Name  sdi410C
Code  R81608
RF input
Frequency range [MHz]   950-2150
AGC range/Input impedance [dBμV/Ω]  45-85/75
RF loop gain [dB]  -1 ± 1
Standard DVB-S
Modulation QPSK QPSK, 8PSK
Symbol rate [Ms/s]     2 ÷ 45   2 ÷ 32
FEC  1/2, 2/3, 3/4, 5/6, 7/8 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
Roll-of [%] 35  20, 25, 35
Standards ETS
300 421
302 307
Power for LNB/ LNB control 0/14/18 V & 300 mA max./ DiSEqC 1.0
IP output
Standard  IEE802.3 10/100 Base T
Bit rate
 up to 100 Mbps
Number of simultaneous streams up to 24
Transmission protocols
Multicast  Yes
General Ethernet interface
IEE802.3 10/100 Base T
Power [V/A] 12/0.2 
Operating temperature range [ºC] 0...50
Dimensions [mm]  36x198x107.5
Weight [kg]  0.84


Notice: The transmodulator is compatible only with CI CAM modules (no support for CI+).


Product type Streamer IP
Name sdi410c
Input standard DVB-S/S2 (8PSK, QPSK)
RF input number of transponders 1
Frequency range MHz 950...2150
Power supply/control 0/13/18 V & 22 kHz, max. 300 mA,DiSEqC 1.0
signal level, AGC dBµV 45...85
Impedance Ohm 75
IP output Bandwidth Mbps 100
Channels FTA (uncoded) Yes
Coded (CI slot) TAK (1 × )
Specyfikacja techniczna
Output standard IP
IP output Ethernet IEE802.3 10/100 Base T
transmission protocol UDP/RTP, SAP/SDP
multicast Yes
Configuration Port RJ-45
IP address
Remote Yes
Power supply V/A DC 12/0.2
Operating temperature °C 0...+50
Weight kg 0,9
Dimensions mm 36 × 198 × 112