IPTV Streamer: TERRA sti-410C (DVB-T/T2/C to IP, CI slot)

Support

Details

The sti-410C R81604 IPTV DVB-T/T2/C to IP streamer allows for the selection of terrestrial (DVB-T/T2) or cable TV (DVB-C) multiplex and its distribution via Ethernet (LAN) network based on twisted-pair cabling. The output IP stream is usually provided to IPTV receivers via network switches. The use of multicast technique considerably saves the network resources.
Thanks to television distribution technology based on IP, the cabling in a building can be limited only to one (data + IPTV) or two (separate for data and for IPTV) UTP/FTP cable(s). In addition to low cost of such cabling, the users get access to additional interactive features, and the programming can be adapted to their specific requirements.
One of the main advantages of the Terra IPTV solution is no need for any middleware software between the headend and the receivers. As a result, the system is much cheaper (no software license fees) than other solutions and very simple in both configuration and operation. A unique feature of the system is the fact that the terminal units - R81612 IPTV receivers - do not require any configuration, which can be of great importance in the case of larger networks. They automatically detect any changes in the local network or the programming.
Key features
  • conversion of DVB-T/T2/C signal to IP stream,
  • multidescrambling (CI slot),
  • conversion of channels from one multiplex (1 module),
  • possibility of creating thematic lists (e.g. channels in the same language) that are automatically detected by receivers,
  • possibility of watching TV on PCs, laptops etc. running free app,
  • IPTV receivers have recording option and access to some web services (YouTube etc),
  • use of twisted-pair cables as the transmission medium,
  • easy way to extend the transmission range (through the use of media converter and optical fiber),
  • low power consumption, power redundancy,
  • IP multicast technique saving LAN resources,
  • unique communication protocol allowing fully automatic configuration of IPTV receivers.
View of the information window of the sti-410c R81604.
The information includes such important parameters like input level in dBμV, SNR, VBER.
The "Output streams" window is used to configure the output streams individually after scanning the input stream. They can carry up to 24 TV/radio channels with individual multicast addresses, in one MPTS stream.
Example of mounting TERRA headend to CD001 housing with DIN rail BD001 R90001. Additionally, there are the SRM-522 R80522 multiswitch and an Ethernet switch mounted on the ID001 R90003 mounting plate. The whole system has the FD001 R90002 ventilation unit with thermostat added.
Notice: The transmodulator is compatible only with CI CAM modules (no support for CI+).
Professional VHF and UHF DVB-T/T2 Antenna Set (H/V): DIPOL 28/5-12/21-48Power Supply HDR-60-12 (12VDC/4.5A, for Terra at/mt/ma modules)Ethernet Media Converter M-203G (for two single-mode fibers up to 20km)Ethernet Media Converter M-203G (for two single-mode fibers up to 20km)IP to 4x DVB-T (COFDM) Transmodulator: TERRA mix-440 (100/1000Mbps, USB port)Power Supply HDR-60-12 (12VDC/4.5A, for Terra at/mt/ma modules)IPTV Streamer: TERRA sti-410C (DVB-T/T2/C to IP, CI slot)
Example of an MATV system (DVB-T) with fiber-optic transmission medium

Specifications

Product type Streamer IP
Name sti410c
Brand TERRA
Input standard DVB-T/T2/C (COFDM, QAM)
RF input Number of MUXes 1
Frequency range MHz 47...862
Power supply/control 12 V, max 100 mA
signal level, AGC dBµV 30...80
Impedance Ohm 75
IP output Bandwidth Mbps 100
Channels FTA (uncoded) Yes
Coded (CI slot) TAK (1 × )
Specyfikacja techniczna
Output standard IP
IP output Ethernet IEE802.3 10/100 Base T
transmission protocol UDP/RTP, SAP/SDP
multicast Yes
MPTS Yes
SPTS Yes
General
Configuration Port RJ-45
IP address 192.168.1.10
Remote Yes
Power supply V/A DC 12/0.2
Operating temperature °C 0...+50
Weight kg 0,9
Dimensions mm 36 × 198 × 112