LCD/LED/OLED TV Wall Mount: Signal LP42-24DT 32" (32''... 55'', tilt)

Code: E93112
This product is no longer available
Estore: Library:



Slim Wire Mount: Signal LED-01X (37
View of the mount
Sketch of the mount

Distinguishing features:
  • Screen size range: 32''... 55''
  • Tilt adjustment: -10o ... +5o
  • Load capacity: 50 kg
  • Distance from wall: 56 mm
  • Mounting interface: VESA 100x100, 200x100, 200x200, 400x200
Signal LP42-24DT E93112 mount has been designed to place a modern LCD/LED/OLED television / monitor on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range of -10 to +5 degrees.
The wall has to carry the load of the panel and the mount, including a wide margin of safety.
The mount cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.

The basic tools required (not included): 3 mm drill bit for mounting on wood / metal constructions, 10 mm masonry bit for brick / concrete block installations, electric drill, Phillips screwdriver (min. length: 200 mm), marker.
Safety warning.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations should be performed by two skilled people!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Name Signal LP42-24DT
Code E93112
Screen size range 32'' - 55''
Distance from wall 56 mm
FDMI / MIS VESA 100x100,200x100,
Load capacity
50 kg
Tilt adjustment
-10o ... +5o
Horizontal rotation
Skew (pivot)
Weight 3.88 kg
Collective package contains 4 mounts.
Available versions of the mount
Name LP42-24DT LP42-44DT LP42-46DT
Code E93112 E93115 E93117
Screen size range
32'' - 55'' 32'' - 55'' 37'' - 70''



Nazwa LP42-24DT
Kod E93112
Rozmiar TV w calach 32'' - 55''
Odległość od ściany 56 mm
Standard mocowania VESA: 100x100,200x100,
Nośność 50 kg
Pochylenie w pionie -10o ... +15o
Obrót w poziomie -
Rotacja w płaszczyźnie ekranu -
Masa własna 3,88 kg