LCD/LED Monitor Wall Mount: Signal LDA18-112N (13"-27")

Code: E93361
€21.48
Price Disc. Quantity Validity
€21.48 0 % from 1 piece
Available
Signal LDA18-112N E93361 bracket has been designed to place a modern LCD/LED monitor or small television on a wall. Its load capacity is 15 kg. The wall mount allows easy adjustment of tilt (without additional tools) in the range of -12° to 8° degrees. It is also possible to rotate the panel horizontally (+/-90 degrees) and level it (+/-3 degrees). The distance between the back of the panel and the wall can be changed from 51 mm to 366 mm. The mount can be used in vehicles - the arm has locking system (in folded position) and special hooks allowing for cable management.
• Screen size range: 13"... 27"
• Tilt adjustment: -12° ... +8°
• Horizontal rotation range: -90° ... +90°
• Leveling: -3° ... +3°
• Load capacity: 15 kg
• Distance from wall: 51 ... 366 mm
• Material: aluminum alloy

Warranty

3-year warranty.

Support

Details

Signal LDA18-112N E93361 bracket has been designed to place a modern LCD/LED monitor or small television on a wall. Its load capacity is 15 kg. The wall mount allows easy adjustment of tilt (without additional tools) in the range of -12o to 8o degrees. It is also possible to rotate the panel horizontally (+/-90 degrees) and level it (+/-3 degrees). The distance between the back of the panel and the wall can be changed from 51 mm to 366 mm. The mount can be used in vehicles - the arm has locking system (in folded position) and special hooks allowing for cable management.




I
Distinguishing features:
  • Screen size range: 13'' ... 27''
  • Tilt adjustment: -12o ... +8o
  • Horizontal rotation range: -90o ... +90o
  • Leveling (rotation in the plane of the screen): -3o ... +3o
  • Load capacity: 15 kg
  • Distance from wall: 51 ... 366 mm
  • Mounting interface: VESA 75x75, 100x100
  • Material: aluminum alloy
The wall or other surface has to carry the load of the panel and the mount, including a wide margin of safety.
The mount cannot be installed on walls/surfaces that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the surface, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.
Safety warning.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations should be performed by two skilled people!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Name Signal LDA18-112N
Code E93361
Screen size range 13" ... 27"
Distance from wall 51 - 366 mm
FDMI / MIS VESA 75x75; 100x100
Load capacity 15 kg
Tilt adjustment -12o ... +8o
Horizontal rotation -90o ... +90o
Leveling
-3o ... +3o
MaterialAluminum alloy
Weight 2.2 kg
Collective packaging contains 10 mounts.
Similar mounts:
Name LCD-T6 LDA05-221 LDA05-222
View
Code E93321 E93331 E93351
Screen size range 13'' - 27'' 23'' - 42'' 23'' - 42''
Since June 15, 2017, the LDA18-112N mount has replaced the LCD-141L item.

Specifications

Product type Monitor bracket
Manufacturer SIGNAL
type Wall
Name LDA18-112N
Adjustment Yes
TV/monitor size inches 13 – 27
VESA standard 75 × 75, 100 × 100
Distance from wall mm 51 – 366
Load capacity kg 15
Horizontal rotation degree -90...+90
Vertical tilt degree -12...+8
Screen plane rotation degree -3...+3
Own weight kg 2,2