LCD Monitor Wall Mount: LDA05-221 (23"...42")

Code: E93331
This product is no longer available

Support

Details

LCD Monitor Wall Mount: LDA05-221 (23
View of the mount
Sketch of the mount
LCD Monitor Wall Mount: LDA05-221 (23
View of the packaging





Distinguishing features:
  • Screen size range: 23'' - 42''
  • Tilt adjustment: -15o ... +15o
  • Horizontal rotation range: -90o ... +90o
  • Pivot (rotation in the plane of the screen): -4o ... +4o
  • Load capacity: 25 kg
  • Distance from wall: 55-280 mm
  • Mounting interface: VESA 75x75,100x100,200x100,200x200
Signal LDA05-221 E93331 bracket has been designed to place a modern LCD monitor/television on a wall. Its load capacity is 25 kg. The wall mount allows easy adjustment of tilt (without additional tools) in the range of +/-15 degrees. It is also possible to rotate the panel horizontally (+/-90 degrees) and in the plane of the screen (-4...+4 degrees). The distance between the back of the panel and the wall can be changed from 55 mm to 280 mm.
The mount has been tested for endurance. During the test, the actual load was 3 times greater than the rated load capacity. After a series of 5000 movements, the structure of the joints did not show excessive wear.
The wall has to carry the load of the panel and the mount, including a wide margin of safety.
The mount cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.

The basic tools required (not included): 3 mm drill bit for mounting on wood / metal constructions, 10 mm masonry bit for brick / concrete block installations, electric drill, Phillips screwdriver (min. length: 200 mm), marker.
Safety warning.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations should be performed by two skilled people!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Specifications
Name Signal LDA05-221
Code E93331
Screen size range 17" - 37"
Distance from wall 55...280 mm
FDMI / MIS VESA 75x75; 100x100; 200x100; 200x200
Load capacity 25 kg
Tilt adjustment -15o ... +15o
Horizontal rotation -90o ... +90o
Pivot
-4o ... +4o
Dimensions 230 mm x 230 mm x 280 mm
Weight 2.4 kg
Collective package contains 5 mounts.
Available versions of the mount (LDA05):
Name LCD-T6 LDA05-221 LDA05-222
View
Code E93321 E93331 E93351
Screen size range
13'' - 27'' 23'' - 42'' 23'' - 42''

Specifications

Product type Monitor bracket
Manufacturer SIGNAL
type Wall
Name LDA05-221
Adjustment Yes
TV/monitor size inches 23 – 42
VESA standard 75 × 75, 100 × 100, 200 × 100, 200 × 200
Distance from wall mm 55 – 280
Load capacity kg 25
Horizontal rotation degree -90...+90
Vertical tilt degree -15...+15
Screen plane rotation degree -4...+4
Dimensions mm 230 × 230 × 280
Own weight kg 2,4