English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
This product is no longer available
Replacements
Support
Details
View of the mount
Sketch of the mount
 |  |  | ||
 |  |  |  | |||
Distinguishing features:
- Screen size range: 23"... 42"
- Tilt adjustment: -15o ... +15o
- Horizontal rotation range: -90o ... +90o
- Pivot (rotation in the plane of the screen): -4o...+4o
- Load capacity: 25 kg
- Distance from wall: 55 ... 440 mm
- Mounting interface: VESA 75x75,100x100,200x100,200x200
Signal LDA05-222 E93351 bracket has been designed to place a modern LCD monitor/television on a wall. Its load capacity is 25 kg. The wall mount allows easy adjustment of tilt (without additional tools) in the range of +/-15 degrees. It is also possible to rotate the panel horizontally (+/-90 degrees) and in the plane of the screen (-4...+4 degrees). The distance between the back of the panel and the wall can be changed from 55 mm to 440 mm.
The mount has been tested for endurance. During the test, the actual load was 3 times greater than the rated load capacity. After a series of 5000 movements, the structure of the joints did not show excessive wear.
The wall has to carry the load of the panel and the mount, including a wide margin of safety.
The mount cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.
The basic tools required (not included): 3 mm drill bit for mounting on wood / metal constructions, 10 mm masonry bit for brick / concrete block installations, electric drill, Phillips screwdriver (min. length: 200 mm), marker.
Safety warning.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations should be performed by two skilled people!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Specifications
| Name | Signal LDA05-222 |
| Code | E93351 |
| Screen size range | 23"... 42" |
| Distance from wall | 55 ... 440 mm |
| FDMI / MIS | VESA 75x75; 100x100; 200x100; 200x200 |
| Load capacity | 25 kg |
| Tilt adjustment | -15o ... +15o |
| Horizontal rotation | -90o ... +90o |
| Pivot | -4o ... +4o |
| Dimensions | 230 mm x 230 mm x 440 mm |
| Weight | 3.2 kg |
Collective package contains 5 mounts.
Similar mounts
Specifications
| Nazwa | Signal LDA05-222 |
| Kod | E93351 |
| Rozmiar TV w calach | 23" - 42" |
| Odległość od ściany | 55 - 440 mm |
| Standard mocowania | VESA 75x75, 100x100, 200x100, 200x200 |
| Nośność | 25 kg |
| Pochylenie w pionie | -15o ... +15o |
| Obrót w poziomie | -90o ... +90o |
| Rotacja w płaszczyźnie ekranu | -4o ... +4o |
| Wymiary | 230 mm x 230 mm x 440 mm |
| Masa własna | 3,2 kg |
