Support
Details


Adjustment range

Sketch of the mount
The DL502 E9635 mount has been designed to place a modern LCD TV or monitor directly over a table or desk. Its load capacity is 15 kg. The mount allows easy adjustment of the vertical position of the panel (without additional tools). It is also possible to rotate the panel (+/-180 degrees) and adjust the tilt.
The openings in the mounting plate are suitable for placing TV/monitors from 13 to 30 inches (diagonal) with VESA 75, 100 mounting interfaces. The mount is attached to a table/desk top with screw clamp.
The mount can be used only on the table/desk top that is able to carry the load of the panel and the mount, including a wide margin of safety.
Safety warning.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer. Improper installation may cause damage or serious injury.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations should be performed by two people (placing the monitor on the mount)!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Specifications
Name | LCD table/desk mount DL502 - tilt, swivel |
Code | E9635 |
Screen size range | 13” – 30” |
Distance from wall | --- |
FDMI / MIS | VESA |
Load capacity | 15 kg |
Tilt adjustment | -12° to +12° |
Rotation range | 360° |
Dimensions | 65 x (280-435) x 80 mm |
Weight | 1.7 kg |
Packaging unit: 20 pieces. Price for one piece.
Specifications
Nazwa | Stołowy uchwyt do monitora LCD DL502, regulowany |
Kod | E9635 |
Rozmiar TV w calach | 13” – 30” |
Odległość od ściany | --- |
Standard mocowania | VESA |
Nośność | 15 kg |
Pochylenie pion | -12° do +12° |
Obrót poziom | 360 |
Wymiary | 65 x (280-435) x 80 mm |
Masa własna | 1,7 kg |