The DL105 E9646
arm has been designed to place modern LCD monitor/television on a wall. Its maximum capacity is 15 kg, so it is suitable for light models. The mount allows easy adjustment of tilt (without additional tools) in the range of 15 degrees. It also provides up to 180 degrees of swivel for optimal screen positioning.
The wall has to carry the load of the LCD and the mount, including a wide margin of safety.
The mount cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.
The basic required tools (not included): 3/16" drill bit, 1/2" masonry bit for concrete block installations, electric drill, wrench or socket set, Phillips screwdriver.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer. Improper installation may cause damage or serious injury.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations should be performed by two skilled people!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
|LCD Wall Arm DL105 (tilt & swivel)
|Screen size range
|13” – 30”
|Distance from wall
|81 - 235 mm
|FDMI / MIS
|VESA 75,100 mm
| 116x152x(81-235) mm
Collective package - 20 items. Price for one item.