The E8010N blade is a spare part for the MASTER E8010 cable stripper.
• Spare blade for MASTER stripper
F connector made of nickel-plated copper. It is fully corrosion-proof, and can be used it both, indoors and outdoors.
• Connector type: F twist-on
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
• Package 100 pcs.
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
• Package 100 pcs.
F connector made of nickel-plated copper. It is fully corrosion-proof, and can be used it both, indoors and outdoors.
• Connector type: F twist-on
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
Twist-on 7.2 mm F-connector made of nickel-plated copper. It is fully resistant to corrosion and can be used for both, indoor and outdoor installation.
• Twist-on 7.2 mm F-connector
• Made of nickel-plated copper
• Tool-free
• 100 pcs. package
• Made of nickel-plated copper
• Tool-free
• 100 pcs. package
Twist-on 7.2 mm F-connector made of nickel-plated copper. It is fully resistant to corrosion and can be used both, for indoor and outdoor installation.
• Twist-on 7.2 mm F-connector
• Made of nickel-plated copper
• Tool-free
• Made of nickel-plated copper
• Tool-free
F connector made of nickel-plated copper. It is completely corrosion-resistant and can therefore be used for both indoor and outdoor installation.
• Connector type: F crimped
• Diameter: 5.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of class RG-59
• Diameter: 5.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of class RG-59
F connector made of nickel-plated copper. It is completely corrosion-resistant and can therefore be used for both indoor and outdoor installation.
• Connector type: F crimped
• Diameter: 6.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of RG-6 class
• Diameter: 6.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of RG-6 class
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 Eca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 B2ca, Dca, Fca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
The monolithic, nickel-plated brass F-connector is designed for RG-59 type cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family



