Mobile DVR Protect 104 (4-ch, 2x SD slot, GPS, accelerometer)

Code: M80104
This product is no longer available
Estore: Library:

Support

Details

Drive Bay for Protect 204 DVR
Front view

Drive Bay for Protect 204 DVR
Rear view

Drive Bay for Protect 204 DVR
The included remote control
Drive Bay for Protect 204 DVR
The included accessories


Drive Bay for Protect 204 DVR
The included adapters
Protect 104 M80104 is a 4-channel mobile DVR designed for use in coaches, city buses, minibuses, street cars / trams, subway, corporate vehicles, tractor-trailer trucks / TIR tracks, patrol cars, prisoner vans, ambulances, military vehicles. It has been specifically designed to provide increased resistance to vibration and shock. The M80104 DVR can simultaneously monitor and record images from 4 cameras (2x D1 and 2x CIF, at 25 fps).
The DVR is designed to be mounted inside the cab of a vehicle, e.g. under the seat, in a glove compartment etc. The power cables have to be connected to the battery and ignition switch (similar to radio), so that the device automatically begins video and audio recording simultaneously with turning on the ignition. This function is maintained for 8 seconds after turning off the ignition. The power circuit is protected by 10 A fuse.
Protect 104 has 4 sockets to plug in adapters terminated with standard connectors for security cameras: BNC (video), RCA (audio), 2.1/5.5 mm jack (12 VDC). They enable the installer to quickly and easily connect the cameras and microphones, including power supply provided directly from the DVR.
The use of SD cards as the storage media allows for easy and fast access to the stored data - it is enough to take out the card from the DVR and insert to the card reader in a PC. This is a big advantage - in need of archiving, the user does not have to connect a laptop directly to the DVR in the vehicle. It is easy to copy the data from the card, or simply keep it as the archive (and put into the DVR another card, either a new or formatted one). The SD cards in the slots are protected by a cap lockable by key - by opening the cap the the user automatically turns off the DVR, which guarantees safe exchange of the storage media.
The GPS antenna has a magnet and double-sided adhesive tape for easy attachment to a surface inside the vehicle. It is recommended to install it near a window to ensure the best possible signal level. Long (5-meter) and thin antenna cable can be run under the lining. GPS data is used to record the route and speed. The information can be retrieved using the application supplied with the DVR. The software, in addition to generating the map of a journey, can play back the video recorded from the cameras, create charts of acceleration and find the moments of activation of alarm inputs. If necessary, the application enables the user to export any portion of the recordings in AVI format.
Alarm inputs can monitor any systems of the vehicle which provide electrical signals coming from the sensors and control devices, e.g. fuel filler opening, opening/closing doors, fastening seat belts, opening cargo space, pressing the brake pedal, switching on turn signal etc.
The DVR is managed with the use of the included IR remote control. The graphical menu is available via analog video output and can be displayed on a suitable video monitor.
Power
  • Wide acceptable voltage range: 9...36 VDC,
  • Cameras powered directly from DVR with 12 VDC.
Interfaces
  • 4x alarm input, 1x alarm output,
  • 4x video input, 1x video output,
  • 4x audio input, 1x audio output,
  • RS-485,
  • RS-232,
  • GPS,
  • IR remote control.
Recording
  • Support for two SD cars, each up to 128 GB,
  • H.264 video compression,
  • Synchronous recording of video, audio and GPS data,
  • Recording continued for 8 seconds after turning off the ignition,
  • Auto-restart of recording after switching on the ignition,
  • Recording of coordinates and the speed of the vehicle,
  • Simultaneous recording of 2 channels in D1 and 2 channels in CIF resolutions, all at 25 fps,
  • Selection among 8 preset quality levels.
Live monitoring
  • Graphical OSD,
  • Full-screen or quad display,
  • Current GPS coordinates,
  • Current speed of the vehicle.
Playback
  • Free application installed on a PC for synchronized playback,
  • Automatic route visualization on Google maps based on GPS coordinates recorded on SD card,
  • Graph showing the speed of the the vehicle,
  • Graph showing the acceleration of the vehicle,
  • Graph showing the signals at alarm inputs,
  • Searching by date & time and channel number,
  • Searching by alarm events.
Handling alarms caused by:
  • Motion detection,
  • Too low speed,
  • Too high speed,
  • Loss of video,
  • SD card failure,
  • SD card overflow,
  • GPS fading/error.
Backup
  • Physical transferring of SD card to a PC with card reader to copy the data,
  • Conversion to AVI format.
Support for Pan/Tilt devices or PTZ cameras
  • RS485 interface supporting multiple PTZ protocols, including PELCO-D and PELCO-P,
  • Pan/Tilt/Zoom/Focus/Iris control.
"Watermark"
  • The date and time of the recording, along with the channel number and special tags embedded into the video stream and displayed on the image guarantee that the recording is authentic.
Security
  • Users' accounts,
  • System logs.
Specifications:
Name Protect 104
Code M80104
Number of video channels/inputs 4
Number of video outputs 1
Display layout
Full-screen or quad
Video compression
H.264
Recording

25 fps; 2xD1 + 2xCIF

Number of audio channels
4
Number of audio outputs
1
Synchronized audio/video recording
Yes
Video bit rates   D1: 2048...400 kbps
HD1: 2048...380 kbps
  CIF: 1536...128 kbps
8 quality levels for each resolution
1 - the highest quality
8 - the lowest quality
Audio bit rates
8 kbps
Storage media interface
2 slots for SD/SDHC cards
Number of alarm inputs
4
Number of alarm outputs
1
GPS Yes
G-Sensor Yes
RS-485 Yes
RS-232 Yes
Users' accounts
Yes
Default password 111111
Playback App installed on a PC
Operating temperature -25oC...+70oC
Operating humidity
20%...95%
Dimensions (WxDxH) 154 x 135 x 45 mm
Supplying voltage
 8...36 VDC
Power consumption
Operation <10 W
Standby < 0.5 W
Menu language
English
The mobile DVR Protect 104 employs efficient H.264 compression. High compression level guaranteed by this standard allows for effective use of the storage media and significant extension of recording time, compared to older standards. The table below shows the interrelation between recording parameters and the occupied memory space.
Interrelation between recording parameters and the occupied memory space
1 - highest quality, ..., 8 - lowest quality
  1 2 3 4 5 6 7 8
D1 900 MB/h 670 MB/h 540 MB/h 450 MB/h 390 MB/h 350 MB/h 315 MB/h 280 MB/h
HD1 560 MB/h 420 MB/h 335 MB/h 280 MB/h 245 MB/h 220 MB/h 195 MB/h 175 MB/h
CIF 350 MB/h 260 MB/h 210 MB/h 175 MB/h 150 MB/h 135 MB/h 120 MB/h 110 MB/h
With the recording parameters set to the highest levels (2xD1, 2xCIF, quality level 1), two 128 GB SDHC cards can store above 100 hours of the material, e.g. from 13 days, 8 hours per day.

Specifications

  1 2 3 4 5 6 7 8
D1 900 MB/h 670 MB/h 540 MB/h 450 MB/h 390 MB/h 350 MB/h 315 MB/h 280 MB/h
HD1 560 MB/h 420 MB/h 335 MB/h 280 MB/h 245 MB/h 220 MB/h 195 MB/h 175 MB/h
CIF 350 MB/h 260 MB/h 210 MB/h 175 MB/h 150 MB/h 135 MB/h 120 MB/h 110 MB/h