Mobile DVR Protect 114 (4-ch, 2x SD slot)

Code: M80114
This product is no longer available
Estore: Library:



Mobile DVR Protect 114 (4-ch, 2x SD slot)
Front view
Mobile DVR Protect 114 (4-ch, 2x SD slot)
Rear view

Mobile DVR Protect 114 (4-ch, 2x SD slot)
View of the included accessories (1)
Mobile DVR Protect 114 (4-ch, 2x SD slot)
View of the included accessories (2)
Mobile DVR Protect 114 (4-ch, 2x SD slot)
View of the remote control
Protect 114 M80114 is a 4-channel mobile DVR designed for use in coaches, city buses, minibuses, street cars / trams, subway, corporate vehicles, tractor-trailer trucks / TIR tracks, patrol cars, prisoner vans, ambulances, military vehicles. It has been specifically designed to provide increased resistance to vibration and shock.
The DVR is designed to be mounted inside the cab of a vehicle, e.g. under the seat, in a glove compartment etc. The power cables have to be connected to the battery and ignition switch (similar to radio), so that the device automatically begins video and audio recording simultaneously with turning on the ignition. This function is maintained for 8 seconds after turning off the ignition. The power circuit is protected by 10 A fuse.
Protect 114 has 4 sockets to plug in adapters terminated with standard connectors for security cameras: BNC (video), RCA (audio), 2.1/5.5 mm jack (12 VDC). They enable the installer to quickly and easily connect the cameras and microphones, including power supply provided directly from the DVR. The DVR allows for simultaneous live monitoring and recording of four channels, (4x AHD 720p @ 25 fps or 4x WD1 @ 25 fps). When the maximum resolution of all channels is limited to WD1, the DVR can additionally operate with a 1080p IP camera.
The IP camera (Onvif-compliant, e.g. Hikvision) is to be connected to the RJ45 socket. The network interface can also be used for connecting the DVR to a LAN in order to configure it, view the recordings, backup some data (via Internet Explorer).
If the DVR is installed in an inaccessible place, we recommend to use Control Panel PROTECT LED KL-1 M80103. The control panel is used as a monitor of the operating status of the mobile DVR and as IR remote control extender.
The use of SD cards as the storage media allows for easy and fast access to the stored data - it is enough to take out the card from the DVR and insert it to the card reader in a PC/laptop. So, in need of archiving, the user does not have to connect a laptop directly to the DVR in the vehicle. It is easy to copy the data from the card, or simply keep it as the archive (and put into the DVR another card, either a new or formatted one). The recordings can be played back with the use of the included CMS software. Along with searching and playing back functions, the software has the ability to generate graphs showing the activity of alarm inputs within defined time periods.
If the user wishes to play back recordings on typical video players (e.g. Windows Media Player), the CMS application allows for converting them into avi or mp4 format. It is enough to click on the AVI icon in the play menu.
A screenshot from the CMS software for Protect DVRs - conversion to AVI format
Alarm inputs can monitor any systems of the vehicle which provide electrical signals coming from the sensors and control devices, e.g. fuel filler opening, opening/closing doors, fastening seat belts, opening cargo space, pressing the brake pedal, switching on turn signal etc.
The DVR is managed with the use of the included IR remote control. The graphical menu is available via analog video output and can be displayed on a suitable video monitor.
  • Wide acceptable voltage range: 9...36 VDC,
  • Cameras powered directly from DVR with 12 VDC.
  • 4x video input, 1x video output,
  • 4x audio input, 1x audio output,
  • 8x alarm input, 1x alarm output,
  • RS-485,
  • RS-232,
  • IR remote control.
  • Support for two SD cars, each up to 128 GB,
  • H.264 video compression,
  • Synchronous recording of video and audio,
  • Recording continued for 8 seconds after turning off the ignition,
  • Auto-restart of recording after switching on the ignition,
  • Simultaneous recording of 4 channels in WD1 at 25 fps plus 1080p IP stream, or of 4 channels in AHD 720p at 25 fps,
  • Selection among 8 preset quality levels.
Live monitoring
  • Graphical OSD displaying:
    • date and time,
    • status of alarm inputs,
    • vehicle identification number.
  • Full-screen or quad display.
  • Free application installed on a PC for synchronized playback,
  • Graph showing the signals at alarm inputs,
  • Searching by date & time and channel number,
  • Searching by alarm events.
Handling alarms caused by:
  • Motion detection,
  • Loss of video,
  • SD card failure,
  • SD card overflow.
  • Physical transferring of SD card to a PC with card reader to copy the data,
  • Conversion to AVI format.
Support for Pan/Tilt devices or PTZ cameras
  • RS485 interface supporting multiple PTZ protocols, including PELCO-D and PELCO-P,
  • Pan/Tilt control,
  • Zoom/Focus/Iris control.
  • The date and time of the recording, along with the channel number and special tags embedded into the video stream and displayed on the image guarantee that the recording is authentic.
  • User accounts,
  • System logs.
Name Protect 114
Code M80114
Standards CVBS, AHD
Number of video inputs
Number of video outputs
Display layout Full-screen or quad
Video compression
Recording (25 fps)

4x WD1 + 1 IP 1080p
or 4x AHD 720p at 25 fps

Number of audio inputs
Number of audio outputs
Synchronized audio/video recording Yes
Video quality setup
8 levels in each resolution
1 - highest quality
8 - lowest quality
Audio bit rate
8 kbps
Archiving 2 slots for SD/SDHC cards
Number of alarm inputs
Number of alarm outputs 1
G-Sensor No
RS-485 Yes
RS-232 Yes
User accounts
Default password
MDVRPlayer password
Playback App installed on a PC
Operating temperature range
Operating humidity range (RH)
Dimensions (W x D x H) 154 x 135 x 45 mm
Supply voltage
 8...36 VDC
Power consumption
Operation  <10 W
Standby <0.5 W
Menu language English