English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Signal MRP multiswitches with passive DVB-T/DAB/FM path have been designed for small/medium size SAT installations built in star topology. One device or a group of such multiswitches feeds the subscriber outlets from individual outputs of the multiswitch(es). This topology is typical for applications in single-family homes and in buildings inhabited by several or so families.
Signal MRP multiswitches
The MRP series has passive terrestrial path. If the terrestrial signals in the location of the terrestrial antenna(s) are not strong enough, it will be necessary to use an antenna preamplifier, or even a high gain outdoor amplifier such as MA080L R82022.
Examples of terrestrial antenna pre/amplifiers
LNA preamplifiers
APL amplifiers
A multi-input high-gain amplifier
View of the TERRA MA080L R82022 amplifier (FM+VHFIII+UHF)
Masthead antenna amplifier Terra MA080L R82022 has FM (88-108 MHz), VHFIII (174-230 MHz), and UHF (470-790 MHz) inputs. Each path has a separate gain adjustment, the UHF path has built-in LTE 800 filter.
The diagram below shows an antenna system composed of A2670, A0710, and A0221 antennas. The masthead antenna amplifier Terra MA080L R82022 has FM (88-108 MHz), VHFIII (174-230 MHz), and UHF (470-790 MHz) inputs. Each path has a separate gain adjustment, the UHF path has built-in LTE 800 filter. The Signal MRP-504 R68504 multiswitch distributes the satellite signals from the A98257 QUATRO LNB, and the amplified terrestrial DVB-T and FM/DAB signals, to four subscriber terminal outlets Signal R694100.
A small installation providing DVB-S/S2, DVB-T, and FM/DAB signals to 4 outlets
The configuration with the MA080L R82022 amplifier allows for adjustment of the gain in a wide range for each band: 20 dB for FM and VHF, 30 dB for UHF.
Other band/broadband amplifiers for use in the terrestrial path
Broadband amplifiers in terrestrial paths of multiswitch systems amplify the signals received by antennas to ensure proper levels in all outlets. It includes the compensation of losses on passive network elements (cabling, splitters, outlets). The amplifiers have one broadband input or several band inputs with individual gain adjustment and a broadband output. They usually ensure compensation of the attenuation of the cabling, changing with frequency, and are equipped with power supplies. The amplifiers are characterized by high maximum output levels of over 100 dBμV.
Indoor antenna amplifier AWS-1033 (FM/BIII/2*UHF/33dB) B11583
The suitable model should be chosen depending on the local needs (required bands or frequency range, gain, output level).
| Name | AWS-141SE | AI-200 | AWS-1141 | AWS-1033 |
 |  |  |  | |
| Code | B11687 | R90450 | B11683 | B11583 |
| Band(s) [MHz] | 87-790 | 47-230 470-862 | 47-862 | 87-110, 174-230 471-862 |
| Max. output level [dBμV] | 106 | 105 | 106 | 109 |
| Gain [dB] | 20...23 | 14 (VHF), 24 (UHF) | 20...21 | 30...34 |
| Power [VDC]/[mA] | 12/65 | - | 12/250 | 12/160 |
| Input(s)/Output(s) | 1/1 | 1/2 | 1/1 | 4/1+1(test) |
| LTE filter | YES | NO | NO | NO |