MPEG-2 Encoder: Terra MD-331 (for MMH-3000 headend)

Code: R81713
This product is no longer available
Estore: Library:

Support

Details

QPSK CI Receiver RDC-313 (QPSK/PAL, for MMH-3000 headend)
View of the encoder
QPSK CI Receiver RDC-313 (QPSK/PAL, for MMH-3000 headend)
The included accessories
The MD-331 R81713 module has been designed for use in the MMH-3000 headend (in the Base Unit UC-380 R81700). This encoder converts analog video/audio signals coming from analog cameras, video players etc. into MPEG-2 coded transport streams. The transport streams can then be fed into the TRX-360 R81709 DVB-T modulator (COFDM) and distributed in a RF network as channels in the DVB-T multiplex.
The encoder has three composite video and three stereo audio inputs. The signals from the inputs are converted into MPEG-2 TS streams available at three individual MPEG2 TS outputs. The outputs are to be connected (via included ribbon connectors) to the inputs of the TRX-360 R81709 DVB-T modulator (the modulator can simultaneously process signals from another encoder or other modules of the MMH-3000 headend equipped with MPEG-2 TS outputs).
The MD-330 R81713 encoder, similarly to all components of TERRA headend, can be configured using free Terra Link or paid CMH Master R81706 software.
View of the MD-331 configuration window
More on MMH-3000 headend you can read in the article :
.
Specifications
Name MD-331
Code R81713
Number of inputs (audio & video)
3
Video compression ISO/IEC13818-2 MPEG-2 MP@ML
resolutions 720x576, 720x480
frame rates
25 (PAL), 30 (NTSC)
Audio compression ISO/IEC11172-3 (MPEG-1 audio) layer 1/2
sampling rates
32 kHz, 44.1 kHz, 48 kHz
bitrates 32-384 kb/s na kanał
audio modes
stereo, joint stereo, dual channel, mono
Audio/video multiplexing
ISO/IEC13818-1 MPEG-2 TS
Bit rates 1 - 15 Mb/s per channel
Video standards PAL (I, B, G, H, D, N), SECAM, NTSC
Power 5.5 VDC / 1 A
Dimensions / Weight 47.5x117x220.5 mm / 0.9 kg
Electrostatic discharge caution

The module contains electrostatic sensitive components. To minimize electrostatic discharge, observe the following precautions:
  • Do not remove module from its anti-static plastic bag until you are ready to install it into the base unit.
  • Hold the module only by its front panel.
  • Do not place the module on an unprotected surface. Immediately after you remove the module from the base unit, you must insert it into its anti-static plastic bag.
  • When the module is not in use, keep it in its anti-static plastic bag.
  • Do not ship or store the module or base unit in/near strong electrostatic, electromagnetic or radioactive fields.