MY CART
My Cart is empty

Multifunctional Cable Tester (with LCD display)
Code: N7058
This product is no longer available
Multifunctional Cable Tester (with LCD display)
View of the device and its far-end adapter
Multifunctional Cable Tester (with LCD display)
View of the packaging
NetWork Cable Tester is a special device designed for preventing and solving cable installation problems. The tests allow to verify proper installation of the cabling.
Distinguishing features:
  • Checking open circuit, short circuit, reverse connection;
  • Exact locating of the fault,
  • Checking wiring errors in 5e, 6e, and telephone cables;
  • Long battery life (up to 50 hours);
  • Simple and easy use;
  • Large LCD display.
NetWork Cable Tester allows to perform multiple tests that:
  • display wiring diagram of the cable,
  • measure cable length,
  • check faults: open circuit, short circuit, reverse connection,
  • determine the distance of open circuit.
NetWork Cable Tester is an ideal tool for verifying cable installation procedures.
In most cases the far-end of the cable is located too far to be connected to the loopback port, so it should be terminated with the far-end adapter. Fault finding is performed in Pair&length mode. If there is any short circuit, "SHORT: yz" information will be displayed (yz - the numbers of short-circuited wires). It has to be fixed before any further measurements. In the case of open circuit the device will display the distance (in meters) to the place of fault.
Specifications:

ModelNetWork Cable Tester SC8108-A
CodeN7058
Performed tests/measurementswire sequence verification, short circuit, open circuit, distance of open circuit, cable length
Tested cables
5e, 6e , telephone
ConnectorsRJ45
Power4 x 1.5V (AA batteries)
Contentstester, far-end adapter, user manual

This product is no longer available
 
Multifunctional Cable Tester (with LCD display)
Code: N7058