Multimode Patch Cord ULTIMODE PC-011S (SC/UPC-SC/UPC, 62.5/125)



ULTIMODE PC-011S patch cord is a section of fiber optic cable with a length of 1 meter, terminated with SC/UPC connectors on both ends.
SC connectors are currently the most popular optical coupling elements due to simple matching (push-pull coupling with a snap), rectangular cross-section allowing dense packing of the connectors on the panel, and plastic construction (of course outside the ferrule).
ULTIMODE patch cords are characterized by low attenuation and back reflection (reflectance). They use highest quality ferrules. Each patchcord passes individual quality control (inspection of surfaces and measurement of transmission parameters - insertion and return loss).
The optical fiber used in the patch cords is OM1 multimode fiber. It provides full compatibility and ability to perform quality splices with existing fiber-optic networks. The average attenuation of the fiber is about 3.5 dB/km for 850 nm, and 1.5 dB/km for 1310 nm. The optical fiber is reinforced by aramid fibers (Kevlar) and covered with PVC sheath.
Distinguishing features:
  • connectors: SC/UPC to SC/UPC
  • one multimode fiber
  • length: 1,5 m
  • low insertion loss


Product type Patchcord
type Simplex
Fiber type Multimode
Connector type A SC/UPC
Connector type B SC/UPC
Connectors SC/UPC – SC/UPC
Fiber standard OM1
Name PC-011S
Length m 1
Insertion loss (IL) A connector dB < 0.25 (A)
B connector dB < 0.25 (B)