English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Descriptions of the satellite LNB outputs and the multiswitch inputs depend on their manufacturers. To avoid confusion, our movie illustrates the differences and clarifies the issue.
€153.80
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €153.80 | 0 % | from 1 piece |
Available
Multiswitch MV516 5 in/16 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 16 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 16 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Details
Multiswitches from MV series are dedicated for medium and large SMATV systems with distribution of SAT IF and terrestrial TV signals, however they can also be used in smaller installations.
The MV-516 R70716 multiswitch has active (amplified) terrestrial and satellite TV paths. Signal level adjustment for each of the satellite and DVB-T paths is performed using dedicated switches. This configuration ensures greater stability of the set parameters in relation to traditional solutions based on potentiometers.
The cast housing ensures high screening efficiency, which prevents interfering signals from penetrating inside the device. The high level of output signal, built-in pre-correction of attenuation characteristics of coaxial cables and graded attenuation of multiswitch outputs enable the construction of large installations, where the length of subscriber connections can reach up to 80 m.
Key features:
- radial structure
- built-in compensation of cable attenuation
- groups of outputs with different output levels
- isolation between outputs better than 30 dB
- active terrestrial path
- die-cast housing provides high screening efficiency (class A)
Recommended Library titles:
Specifications
| Product type | Multiswitch | ||
| Number of LNBs | 1 × quatro | ||
| Series | MV-5xx | ||
| Model | MV-516 | ||
| Brand | TERRA | ||
| type | final | ||
| type | classic | ||
| Applications | Indoor | ||
| Type of cooperating converter | Quatro | Yes | |
| Type of cooperating converter | Wideband | No | |
| No. of inputs | 5 | ||
| No. of outputs | Legacy | 16 | |
| RF path | Active | Yes | |
| RF path | Preamplifier power supply | No | |
| Device specifications | |||
| Input | RF band | MHz | 47-862 |
| Input | SAT IF band | MHz | 950-2150 |
| Gain control in RF path | dB | 0...-15 with step 1 | |
| gain control in SAT IF path | dB | 0...-12 with step 4 | |
| Output | RF band | MHz | 47-862 |
| Output | SAT IF band | MHz | 950-2150 |
| RTV signal level at outputs 1-4 | dBµV | 88 | |
| RTV signal level at output 5-8 | dBµV | 86 | |
| RTV signal level at output 9-12 | dBµV | 84 | |
| RTV signal level at output 13-16 | dBµV | 82 | |
| SAT IF signal level on outputs 1-16 | dBµV | 105 | |
| SAT IF path gain – built-in pre-correction of cable attenuation characteristics | outputs 1-4 | dB | 5...14 |
| SAT IF path gain – built-in pre-correction of cable attenuation characteristics | outputs 5-8 | dB | 4...12 |
| outputs 9-12 | dB | 3...10 | |
| outputs 13-16 | dB | 2...8 | |
| RF path amplification – built-in pre-correction of cable attenuation characteristics | outputs 1-4 | dB | -1...5 |
| RF path amplification – built-in pre-correction of cable attenuation characteristics | outputs 5-8 | dB | -2...3 |
| outputs 9-12 | dB | -3...1 | |
| outputs 13-16 | dB | -4...1 | |
| Input separation | SAT IF | dB | >30 |
| Output separation | FM TV | dB | >35 |
| Output separation | SAT IF | dB | >30 |
| Return loss | TV/SAT | dB | >30 |
| Return loss | SAT/RF | dB | >40 |
| Power on RF inputs | H/Lo, H/Hi | V | 18 |
| Power on RF inputs | V/Lo, V/Hi | V | 14 |
| Current drawn | from receiver | A | <0.065 |
| Current drawn | from H line or external power supply 18 VDC | A | 0.06 |
| Control signals | 14/18V, 0/22 kHz | ||
| Die-cast enclosure | Yes | ||
| Remotely powered | Yes | ||
| Built-in power supply | No | ||
| Screening efficiency class | A | ||
| Compliance with relevant national legislation | No | ||
| Power supply | V/Hz | DC 18 | |
| Operating temperature | °C | -20...+50 | |
| Dimensions | mm | 267 × 135 × 30 | |
| Weight | kg | 0.9 | |
Videos
Designing antenna systems with the use of free software from TERRA - SatNet application. The program allows to prepare the project in graphical form, to determine signal levels in all outlets and verify if they are compliant with standards, and to decide whether to use equalization function of the amplifiers. The program enables the user to archive the designs.
Related products
