This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

Non-invasive ballast mast ZB-1100/50+RAM6/415*265

  2. Assembly Components
  3. Ballast structures
Code: E8748
€105.98
Price Disc. Quantity Validity
€105.98 0 % from 1 piece
Available
Replacements
Ballast Mast Base MB-3/PLUS Code: E8744
The ZB-1100/50+RAM6 non-invasive ballast mast with adjustable angle of the mast in relation to the ground is designed for the installation of satellite dishes.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Designed for mounting satellite dishes
• Mast length: 1,1 m
• Mast diameter: 50 mm
• Base dimensions: 106,0 x 91,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
Estore: Library: , .

Warranty

3-year warranty.

Support

Any questions or comments?

  • Write to us!

Details

The ZB-1100/50+RAM6 non-invasive ballast mast with adjustable angle of mast in relation to the ground is designed for the installation of satellite, television or data transmission antennas. It enables installation on flat, resistant surfaces in places where interference in the structure or roof sheathing is impossible or inadvisable. The ZB-1100/50+RAM6 ballast mast base, 1.1 m high and 50 mm in diameter, consists of 6 frames measuring 41.5 × 26.5 cm allowing the installation of 12 concrete blocks measuring: 38 cm × 24cm × 12 cm. The satellite dish should be placed on the mast as low as possible, just above the concrete blocks.
Key features:
  • base made of 3 mm thick galvanised steel sheet, extrusion moulded
  • single frame size: 41.5 × 26.5 cm
  • base dimension when folded: 106.0 × 91.0 cm
  • galvanised mast length 1.1 m and diameter 50 mm
  • smooth adjustment of the mast's tilt angle in relation to the ground 0...5°
  • the mast is sealed at the top with a plastic plug to protect the inside of the pipe from moisture
  • mast is designed to be loaded with concrete blocks with dimensions: 38 cm × 24 cm × 12 cm
  • blocks must be loaded onto the base and fastened with a plastic strap (e.g. PP strap)
The bracket is equipped with a mechanism enabling free adjustment of the pole's angle of inclination in relation to the ground 0...5°. This allows the mast to be positioned vertically on surfaces with a slight slope, facilitating proper installation and ensuring the stability of the entire structure.
Stability
The E8748 non-invasive ballast mast loaded symmetrically with 12 concrete blocks measuring: 38x24x12 cm (12 x 21 kg) remains stable with a side load of up to 90 kgf applied 20 cm below the top of the mast. This corresponds to a wind pressure of 35 m/s or 126 km/h on a 120 cm diameter canopy.
Poland has been divided into wind load zones due to differences in wind characteristics. Zone I covers most of the country, zone II the coastal areas and zone III the mountainous areas.
Zone Characteristics Wind base velocity (*)
1 Central Plains 22 [m/s]
2 Coast and lake districts 26 [m/s]
3 Mountainous areas 30 [m/s]
(*) in the European wind load calculation model, the basic forecast value, which depends on climatic conditions, is the 10-minute average wind speed, called base wind speed.
Wind load zones in Poland.

Specifications

Product type Ballast mast
type ZB-1100/50+RAM6
Brand DIPOL
Mast included Yes
Mast Length m 1.1
Mast Diameter mm 50
Material galvanised steel
Base Dimensions cm 61,0 x 41,5
Base Material galvanised steel
thickness mm 3
Size of a single frame zewnętrzny cm 41,5 x 26,5
Adjustment vertical degree 0...5
Bracket for concrete blocks number pcs. 6
Possible dimensions of the blocks cm 38 × 24 × 12
Folded base dimension cm 106,0 x 91,0
Weight of the set kg 18.5