English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Support
Details
Note: the maximum cable length shipped in a parcel is 500 m. Longer sections can be shipped by courier.
ZTT DAC L79312 fiber optic cable for direct underground installation. The cable has a PE sheath with high crushing resistance (4000 N). Cables with such sheath are also resistant to low temperatures. It can be used on the last mile of a FTTH system, as well as any installation that requires in ground connections, where casing pipes cannot be used for additional protection.
The cable can also be installed in existing telecommunication ducts: the maximum pulling force during installation equals 1200 N.
Inside the central tube, there are 12 G.652D fibers. The central tube is filled with gel to protect fibers from moisture and vibration. The cable is reinforced with two 0.9 mm diameter FRP bars.
The thickness of the cable is 6 mm.
Key features:
- PE sheath and design for direct underground installation
- Crush resistance 4000 N
- Maximum tension force 1200 N
- 2 FRP bars 0.9 mm
- Central tube filled with hydrophobic gel
Complies with:
- IEC 60793-1
- IEC 60793-2
- IEC 60794-3-10
Specifications
| Product type | Fiber optic cable | ||
| Brand | FIBERTECHNIC | ||
| Name | Z-XOTKTCDD | ||
| Cable type | Earth Dose | ||
| Number of fibers | 12 | ||
| Fibers | type | Single-mode, 9/125 | |
| standard | G.652D | ||
| buffer | 250 μm | ||
| CPR class | FCA | ||
| Outer sheath material | PE | ||
| Hydrophobic gel | Yes | ||
| Gain | FRP rods | ||
| Central tube | Yes | ||
| Outer diameter | mm | 5.3 | |
| Crush strength | N | 4000 | |
| Maximum pulling force | dynamic | N | 1200 |
| static | N | no data | |
| Min. bending radius | static | mm | no data |
| installation | mm | 120 | |
| Temperature range | operation | °C | -30...60 |
| installation | °C | -20...50 | |
| storage | °C | no data | |
| Weight | kg/km | 42 | |
| Cable length | m | Sold per meter | |
