Outdoor Compact Camera: n-cam 700 ANPR (600 TVL, Sony Super HAD II CCD, 0.08 lx, 9-22 mm, IR up to 40m, OSD)

Code: M11290
This product is no longer available
Estore: Library:

Support

Details

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
General view of the camera

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
Bottom view
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
The twilight sensor sensor has been placed in the rear part of the camera
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
The included accessories

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the packaging
n-cam 700 M11290 compact camera has been specially designed for easy identification of registration/license numbers of vehicles in motion.
IR illuminators in conventional CCTV cameras cause overexposure that does not allow for any recognition of license plate numbers. White, usually fluorescent background of the numbers/letters reflects back the IR light which floods the black/color signs. The location of the license plate on a car, typically between the headlights, also makes it difficult to read the signs - the very bright points in the image are compensated by a general darkening of the rest.
n-cam 700 M11290 has been specially designed for operation in those conditions. It is equipped with special polarizing filters and specific DSP to ensure good visibility of the markings both in daylight and in IR light. Additionally, its external twilight sensor has been placed in the rear part of the camera body, which eliminates momentary switching into color mode that could be caused by the lights of approaching vehicles at night.
Images from a conventional CCTV camera (left) and from n-cam 700 ANPR M11290 (right)
Key features:
  • camera designed for systems enabling recognition of license plate numbers, for monitoring of entrances, parking lots etc. where lighting conditions are usually poor;
  • polarizing filter;
  • digital signal processor (DSP) specifically prepared for number plate recognition;
  • external twilight sensor placed in the rear part of the camera body - protection against momentary switching into color mode caused by the lights of approaching vehicles at night;
  • HLI function (High Light Inversion, Eclipse) - compensation of strong light;
  • 3D noise reduction - effective noise reduction without motion blur (trails);
  • 1/3" Sony Super HAD II CCD, 600/650 TVL;
  • sensitivity: 0.08 lx (B/W);
  • 9-22 mm Auto-Iris lens;
  • IR illuminator - 42 IR LEDs, range up to 40 m;
  • IP 66;
  • OSD menu;
  • service video output.
Camera operating parameters can be changed using an on-screen menu controlled by buttons under the cup on the bottom of the body.
OSD settings include:
  • shutter speed
  • brightness
  • contrast
  • sharpness
  • white balance
  • AGC
  • HLI (High Light Inversion)
  • BLC
  • Day/night function
  • DWDR (Digital Wide Dynamic Range)
  • DNR
  • motion detection (64 zones with sensitivity adjustment)
  • 4 privacy masks
  • camera name
  • reset to factory default settings
Specifications:
Name n-cam 700 ANPR
Code M11290
Application
identification of registration/license numbers (ANPR)
Image sensor / DSP
1/3" Sony Super HAD II CCD
Video standard PAL
Effective pixels
795(H)x596(V)
Horizontal resolution [TVL] 600 (color)          
  650 (B/W)
Sensitivity at F1.2 [lx]
0.2 (color)               
0.08 (B/W)
S/N ratio [dB]
>50
Electronic shutter (ES) [s]
1/50...1/100000
AGC Yes
OSD menu
Yes
Wide dynamic range (WDR) Yes (DWDR)
BLC Yes
Day/night function
Yes
Digital noise reduction (DNR)
Yes, 3D
Privacy masks Yes, 4 zones
Mirror image
Yes
Motion detection
Yes, 64 zones
IR illuminator
Yes, 42x IR LED, range up to 40 m
Lens (focal length [mm])
9-22, Auto Iris
Viewing angle
12.5°... 30°
Housing type Compact (bullet)
Dimensions [mm] 76x146x250
Vandal-proof housing
No
Main housing material Metal (aluminum alloy)
Operating temperature [°C] -20...+45
IP rating
IP66
Connectors Video (BNC)
Power (2.1/5.5)
Power 12 VDC; 0.65 A
Power consumption [W]
7.8
Weight [kg] 1.1
(*) - the IR reflector range depends on the type of illuminated objects/surfaces (reflectance in the infrared range).