This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

PoE switch (extender) ATTE APT-3-11 (3 ports, 802.3at, 10/100 Mbps)

  2. LAN & WLAN
  3. Switches
  4. PoE
Code: N29821
€53.39
Price Disc. Quantity Validity
€53.39 0 % from 1 piece
Available
PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
Estore: Library: , , , , .

Warranty

3-year warranty.

Support

Any questions or comments?

  • Write to us!

Details

The APT-3-11 is a PoE network switch acting as an extender (repeater) of the LAN and PoE power supply. It is most often used in situations where several network devices (e.g. several IP cameras) need to be connected on a single UTP cable, or where an additional network branch is required.
The device provides compatibility with IEEE 802.3af/at standards both as PoE receivers and on all output ports.
Key features:
  • can be powered from another 802.3af, 802.3at or PoE Passive switch (PoE IN port)
  • reinforces and splits the network signal (fully functional 100 Mbps switch)
  • cascade power supply (one switch powers another)
  • up to 2 PoE 802.3af/at receivers can be powered
  • up to 30 W total power when powered from UTP
  • built-in LR150 feature extends maximum transmission distance to 150 metres
  • small size of the device allows it to be installed in small spaces, e.g. in a camera base
  • low power consumption of the device (< 0.3 W)
  • easy and quick commissioning without configuration of parameters
  • wide operating temperature range
Primary uses:
  • as a splitter for 2 PoE receivers (IP cameras) powered from a single UTP cable, e.g. installation of additional cameras in place of the existing ones without changing the cabling
  • in cascade (serial) connection for connecting several PoE IP devices over distances exceeding 100 m UTP
In the case of installation in limited space, it is possible to cut and break out the mounting brackets of the cradle, thus reducing the dimensions of the module.

Specifications

Model APT-3-11
Applications Switch PoE
Manufacturer ATTE
Interfaces
Ethernet ports number of ports 3
Ethernet ports port types Fast Ethernet
PoE 10/100 MBps 3
Optical port Slot SFP No
PoE properties
PoE Yes
PoE standard 802.3af, 802.3at
Extend mode Yes
Device properties
Power supply PoE 802.3af, 802.3at
Number of fans None
Dimensions mm
Mounting Desktop, Box mounting
Redundant supply No
Certificates CE/FCC
Package content Manual, Switch
Operating environment
Temperature operation ℃ -25...+65