EN
PL
CZ
DE
IE
HU
PT
RO
SK
€58.76
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €58.76 | 0 % | from 1 piece |
Available
Gigabit PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
Details
The APT-3-50 is a gigabit PoE network switch that acts as a LAN extender (repeater) and PoE power supply. It is most commonly used in situations where several network devices (e.g. several IP cameras) need to be connected on a single UTP cable, or where an additional network branch is required. The device combines compact dimensions with high gigabit throughput.
The device provides compatibility with IEEE 802.3af/at standards as PoE receivers and IEEE 802.3af/at on all output ports.
Key features:
- can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
- reinforces and splits the network signal (fully functional 1000 Mbps switch)
- cascade power supply (one switch powers another)
- up to 2 PoE 802.3af/at receivers can be powered
- up to 30 W total power when powered from UTP
- 1,000 Mbps throughput
- low power consumption (< 0.3 W)
- small size of the device enabling installation in small spaces, e.g. in a camera base
- easy and quick start-up without configuring parameters
- wide operating temperature range
Primary uses:
- as a splitter for 2 PoE receivers (IP cameras) powered from a single UTP cable, e.g. installation of additional cameras in place of existing cameras without changing the cabling
- in cascade (serial) connection for connecting several PoE IP devices over distances exceeding 100 m UTP
In the case of installation in limited space, it is possible to cut and break out the mounting brackets of the cradle, thus reducing the dimensions of the module.
Specifications
| Model | APT-3-50 | ||
| Applications | Switch PoE | ||
| Manufacturer | ATTE | ||
| Interfaces | |||
| Ethernet ports | number of ports | 3 | |
| Ethernet ports | port types | Gigabit Ethernet | |
| PoE 10/100/1000 MBps | 3 | ||
| Optical port | Slot SFP | No | |
| PoE properties | |||
| PoE | Yes | ||
| PoE standard | 802.3af, 802.3at | ||
| Extend mode | No | ||
| Device properties | |||
| Power supply | PoE | 802.3af, 802.3at | |
| Number of fans | None | ||
| Dimensions | mm | ||
| Mounting | Desktop, Box mounting | ||
| Redundant supply | No | ||
| Certificates | CE/FCC | ||
| Package content | Manual, Switch | ||
| Operating environment | |||
| Temperature | operation | ℃ | -25...+65 |
