Pole mount for sealed Signal 210/230/145 boxes IP66

SAFETY MEASURES

1. Make sure the wall on which you plan to mount the mount is strong enough (e.g. concrete, brick, solid drywall with reinforcement).
2. Prepare all required tools, such as a level, drill, wrench, screws and dowels, according to the manufacturer's instructions.
3. Use protective gloves to avoid cuts when working with metal parts of the fixture.
4. Wear safety glasses when drilling to prevent dust or debris from getting into your eyes.
5. Make sure you have a stable position when working - use a sturdy ladder if the assembly requires access at height.
6. Before installation, check that there are no electric wires, water pipes or gas pipes running through the wall.
7. Fix the bracket with dowels and screws according to the manufacturer's recommendations, suitable for the type of wall.
8. Always fix the TV to the mount with the help of another person to avoid the risk of dropping the device.
9. Do not exceed the maximum load specified by the manufacturer.