English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
€26.83
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €26.83 | 0 % | from 1 piece |
Available
In the ZMC-3 module of the vertical RACK board mounting system, a panel with 12 keystone module slots is placed next to a short (190 mm) EURO rail.
• Enables installation of TV and non-TV components in a RACK cabinet
• Front-mounted
• Built-in EURO TH35 rail
• Universal - possibility of installing elements with different way of fastening
• 12 holes for Keystone connectors
• Material: aluminium PA11
• Colour: black
• Front-mounted
• Built-in EURO TH35 rail
• Universal - possibility of installing elements with different way of fastening
• 12 holes for Keystone connectors
• Material: aluminium PA11
• Colour: black
Details
RACK board allows installers to make use both of the front and side surfaces of 19" RACK cabinets, which are accessible after dismantling the side walls. The solution enables unprecedented volume filling factor of the cabinets, while maintaining good access to all signal distribution devices, with proper ventilation, connection transparency, application of patch panels to connect all inbound and outbound cables. All the features make it easy for technicians to diagnose the network during operation.
Detailed information on the RACK board vertical mounting system is available here.
In the ZMC-3 R77230 module of the vertical mounting system RACK board there is a panel with 12 holes for keystone modules next to a short (190 mm) EURO rail. This arrangement allows better space management in the rack, when there are not many devices on the EURO bus and there is a need to mount up to 12 keystone modules, e.g. of different types.
Main features of the RACK board vertical mounting system:
- Predefined installation sets for individual equipment configurations enable simple and quick assembly.
- Mounting panels RACK board make it possible to arrange equipment and cables in such a way that a RACK cabinet filled with devices is aesthetically pleasing and looks very professional. Excess (spare) cables are hidden in the middle of the rack behind the equipment (in flat enclosures the cables are at the front and the equipment is hidden behind them, which makes it difficult to adjust parameters, measure signals and worsens cooling).
- Because of its design, the RACK board system is universal - although it is dedicated to TERRA devices, nothing prevents it from being used to mount other teletechnical devices, such as GSM repeaters, routers, switches, etc.
- Because every device in the RACK board system is placed vertically and it does not adhere to any other device or element of the RACK cabinet, it is naturally cooled by the air circulation inside the cabinet.
- Each device has its own mounting panel and the spaces between devices allow for easy wiring.
- Hardware components of RACK board system:
- ZMB series - side assembly components for installing on the side surfaces of large standing cabinets. Currently, we offer panels for mounting in 800 x 600 cabinets.
- ZMC series - front assembly components that can be installed together with ZMB panels.
- ZMD series - front assembly components for hanging or standing cabinets (cannot be used with ZMB series due to 19'' width).
- With the RACK board system the installer can make use not only of the front of a RACK cabinet (rails with 19" spacing) but also of the side spaces - the access to those devices is obtained by dismantling side walls of the RACK. The ZMB side assembly is mounted (on the left and/or right side) to the front and rear RACK rail. Currently we offer the ZMB-1-800 assembly for 600x800 mm standing RACK cabinets.
- The installer can use ZMC front-mount assemblies in several versions. They allow for installing in the front part of the cabinet both the 19’’ standard devices but also other equipment mounted on the EURO TH35 rail or on vertical planes.
- The RACK board system assemblies are mounted to the RACK rails using standard M6 screws and baskets, included in the set.
- The elements of the RACK board system are made of hard aluminum sheets PA11 (DIN, ISO: AlMg3), powder painted in RAL9004 color. If the prepared mounting holes do not fit the mounted equipment, it is easy to drill new ones.
- The ZMD components can be used in standing or hanging cabinets, but they cannot be used together with ZMB components that take the whole 19" width.
- The cables providing signals from antennas are connected to the patch panel with F connectors which, via bridges, transmits the signals to a next patch panel and the required devices. By taking the connection bridges, the installer/technician can measure the input signal in any path.
- All outbound cables are also connected to panels with F connectors. Each connector can be marked with the number of the corresponding apartment, which helps to perform diagnostics of the whole distribution network, beginning with the measurements of the output signals.
Specifications
| Product type | RACK mounting accessories | ||
| Series | RACK board | ||
| Name | ZMC-3 | ||
| Installation | Front | ||
| Installation of devices | Panel + EURO rail TH35 190 mm, Panel 12 keystone 180 × 170 | ||
| Material | Aluminium PA11 | ||
| Color | RAL 9004 | ||
| Dimensions | mm | 483 × 43 × 100 | |
| thickness | mm | 1.5 (panel), 2 (carrier) | |
| Rail height | U | 1 | |
| Mounting dimensions | '' | 19 | |
| Weight | kg | 0.5 | |
