English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Signal-HD HDMI to IP converter enables the user to connect remote (up to 100 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units, as well as remote control extender for a Blu-ray/DVD player, STB etc.
€51.76
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €51.76 | 0 % | from 1 piece |
Available
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. IR extender.
• Transmission via a single cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
Details
Signal HD HDMI to IP converter enables the user to connect high definition signal (HD) to a receiver (TV set, monitor) equipped with HDMI interface, via CAT5e or CAT6 cable.
IP signal coming from the transmitter may be applied to an Ethernet switch to split it among multiple receivers. The bit rate of the compressed signal at the output of the transmitter is about 30 Mbps. The output signals can be properly decoded only by the dedicated receivers - it cannot be done by a PC equipped with a network card.
Key features:
- Transmission via a single Cat. 5e/6 cable
- UDP/IP protocol (multicast)
- Possibility of point-to-multipoint topology
- Support for 1080p mode
- Maximum length of cable: 100 meters
- Remote control extender
The system is perfect for connecting remote HD source like sat receiver, Blu-ray player, PC, game console etc. to HD-enabled TVs/monitors/projectors. The connection to each of the TVs/monitors requires to use only one, comparatively thin cable, which makes it easy to hide it, e.g. when installing the TV/monitor on an LCD/LED mount.
An application of the HDMI > IP converter/extender (point-to-point)
HDMI > IP converter application diagram (point-to-multipoint connection)
The converter/extender uses High-Definition Digital Bit Transmission Technology (HDbitT). HDbitT is a protocol used for professional delivery/transmission of high-quality image and audio over IP networks. The protocol supports video resolutions of up to 4Kx2K @ 60Hz, transmitted wirelessly or over network cables, electrical installations, optical fibers, or coaxial cables.
Specifications
| Name | HDMI to IP signal converter + remote control extender v4.0 | ||
| Product type | HDMI to IP converter | ||
| Manufacturer | SIGNAL | ||
| Interfaces | |||
| Transmitter interfaces | HDMI | Yes | |
| IR | Yes | ||
| RJ-45 | Yes | ||
| Receiver interfaces | HDMI | Yes | |
| IR | Yes | ||
| USB | Yes | ||
| RJ-45 | Yes | ||
| Device properties | |||
| Video formats supported | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p | ||
| transmission protocol | HDbitT | ||
| Max length of twisted pair cable | cat. 5 | m | 100 |
| cat. 5e | m | 100 | |
| cat. 6 | m | 100 | |
| cat. 6A | m | 100 | |
| cat. 7 | m | 100 | |
| Integrated extension cable | IR | Yes | |
| Max. number of receivers | 253 | ||
| Device properties | |||
| Transmitter power supply | VDC | 5 | |
| Receiver power supply | VDC | 5 | |
| Dimensions | mm | 130 × 85 × 24 | |
| Mounting | standalone | ||
| Certificates | CE | ||
| Package content | IR, HDMI receiver, Power supply | ||
| Operating environment | |||
| Temperature | operation | ℃ | -10...+60 |
| Humidity | air | % | 10...90 |
