RF Attenuator DSE TA01-20 (20 dB, 5-1000 MHz)

SAFETY MEASURES

1. Check the condition of the signal cables - do not use damaged or abraded cables.
2. Before installation, make sure that the device is in good working condition with no visible mechanical damage.
3. Store devices in dry and clean places to avoid corrosion and moisture damage.
4. Use the devices according to their intended use and in the recommended environmental conditions (e.g. temperature, humidity).
5. Always use appropriate tools and fasteners adapted to the type of device (e.g., clamps, brackets).
6. Mount devices on stable and non-combustible surfaces, ensuring solid mounting.
7. Ensure that the device is not located in areas where it may be exposed to mechanical impact, chemicals, dust or high temperatures.
8. Avoid touching devices in areas with sharp edges that may cause injuries.
9. Keep the device away from small children and animals if there is a risk of accidental damage or ingestion of small parts.
10. If the device is installed in an inaccessible place, take care of proper protection during the system (appropriate ladder, belts, etc.).
11. When connecting cables and/or connectors take care of hand safety - avoid skin abrasions by using installation tools and/or protective gloves.