MY CART
My Cart is empty

F&Wave

Controllers

Roller Blind Controller: F&Wave FW-STR1D (1.5A/230VAC, for DIN rail)
Code: F3522
Price w/o taxPriceDisc.Validity  
29.21 EUR29.21 EUR0 %
2-year warranty
Roller Blind Controller: F&Wave FW-STR1D (1.5A/230VAC, for DIN rail)
General view
Roller Blind Controller: F&Wave FW-STR1D (1.5A/230VAC, for DIN rail)
View of the packaging
FW-STR1D module (DIN rail mountable) is a 3-state relay with wireless interface and two inputs for local control. The controller receives information from a remote control or local buttons to lower down / raise up the blind.
F&Wave is a family of devices managed wirelessly over distances up to 100 m, for control of various electrical appliances. The receivers/actuators have versions suited for installation on DIN rails (1S modules) or for placing in Ø60 round recessed boxes. They can be controlled via additional local buttons, or remotely, with handheld or fixed remote control units. A unique feature of the system is the retransmission of the control signals through the modules, which improves reliability and extends the range of operation.
Short pressing of a monostable switch connected to a local input results in motion in the desired direction, second pressing during the movement stops the operation. Long pressing of a switch (above 5 seconds) switches the controller to the setup mode.
The FW-RC4 F3104 and FW-RC10 F3110 remote controls operate as bistable switches: one pressing of the dedicated button results in motion in the desired direction, second pressing during the movement stops the operation. The FW-RC5 F3105 control also has separate inputs for connecting "always switch ON" and "always switch OFF" switches.
Key features
  • Roller blind controller (for AC motors),
  • Designed for F&Wave wireless systems,
  • Can be controlled from up to 8 remote controls,
  • Can be controlled locally with any monostable potential-free contacts,
  • Two outputs for two directions (1.5 A, AC-3),
  • Small size (1S), dedicated for mounting on a DIN rail,
  • Screw terminals,
  • Retransmission of control commands for higher reliability and wireless range extension,
  • Low power consumption,
  • Built-in thermal overload protection,
  • Protection against simultaneous switching on of both directions.
2-channel Wireless LED Controller: F&Wave FW-LED2D (for DIN rail)2-channel Wireless LED Controller: F&Wave FW-LED2PRoller Blind Controller: F&Wave FW-STR1D (1.5A/230VAC, for DIN rail)Roller Blind Controller: F&Wave FW-STR1P (0.6A/230VAC)Single Bistable Relay F&Wave FW-R1D (for DIN rail)Single Bistable Relay F&Wave FW-R1PWireless Dimmer F&Wave FW-D1P5-button Remote Control: F&Wave FW-RC5 (for Ø60 box)10-button Remote Control: F&Wave FW-RC104-button Remote Control: F&Wave FW-RC4
Applications of F&Wave system


  • A - a LED strip
    • LED strips are controlled with dedicated controllers, managed by local buttons connected directly to a controller, or, more conveniently, by handheld remote controls. The strips can be switched on/off and dimmed. There are two versions of 2-channel LED controllers:
      • FW-LED2P F3421,
      • FW-LED2D (to be mounted on DIN rail F3422).
  • B - a roller blind
    • Roller blinds are controlled with dedicated controllers, managed by local buttons connected directly to a controller, or, more conveniently, by a handheld remote control. There are two versions of the controllers (230 VAC):
      • FW-STR1P F3521,
      • FW-STR1D (to be mounted on DIN rail F3422).
  • C - an electrical appliance with switch ON/OFF control
    • This type of devices can be controlled with relay modules. The dedicated relay modules are composed of one or two relays. The switch ON/OFF function can be performed locally (with additional keys connected to a module) or wirelessly, by a handheld remote control. The available relay modules:
      • Single bistable relay FW-R1P F3211,
      • Single bistable relay FW-R1D (to be mounted on DIN rail F3422),
      • Double bistable relay FW-R2D F3221,
      • Double bistable relay FW-R2D (to be mounted on DIN rail F3422).
  • D - a dimmable light source
    • The control of dimmable light sources is carried out by dedicated dimmers. A light source can be switched ON/OFF and dimmed/lightened to a desirable level either locally (with additional keys connected to the dimmer module) or remotely (a handheld remote control). The available dimmers:
      • Wireless dimmer FW-D1P F3311,
      • Wireless dimmer FW-D1D (to be mounted on DIN rail F3422).
  • E - 5-button transmitter (to be placed in a Ø60 flush-mounted box)
    • The transmitter controls paired modules.
  • F - handheld remote control
    • Handheld remote controls allow users to control paired components of F&Wave systems. The available units:
Wiring diagram
Specifications
NameRoller Blind Controller: F&Wave FW-STR1D
CodeF3522
Power [VAC]85...265
Power consumption [W]1
Switching capacity
1.5 A / 250 VAC
Wireless interface frequency [MHz]868
Operating temperature range [°C]-25...65
Screw terminals [mm²]2.5
Mounting

DIN rail TH-35 mm

Width [mm]
1S (18 mm)
IP rating
IP20
Price w/o taxPriceDisc.Validity  
29.21 EUR29.21 EUR0 %
 
Roller Blind Controller: F&Wave FW-STR1D (1.5A/230VAC, for DIN rail)
Code: F3522
COMPLETE WITH
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE