English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Support
Details
Together with the smartphone application, the SatPal controller makes a professional
satellite signal measurement meter.
satellite signal measurement meter.
View of the meter
View from the F-type connectors: signal LNB (DVB-S/S2) and RF Loop.
Accessories included: powerbank, car charger,
USB-mini cable, belt, set of rubber bands.
USB-mini cable, belt, set of rubber bands.
View of the packaging
SatPal, equipped with a real-time spectrum analyzer, enables professional measurements of signal strength and quality, MER, BER, PER and C/N.
Programmer of converters and Inverto Unicable II multiswitches.
Key features:
- measurement of DVB-S/S2 signals
- meter for measuring satellite systems using an iOS/Android smartphone application
- programmer for Inverto Unicable II converters and multiswitches
- percentage indication of signal strength and quality
- measurement of all necessary signal parameters such as: signal level expressed in dBμV, C/N, BER, MER
- possibility to edit the satellite, transponder, frequency
- installation and reports wizard generates comprehensive reports in various formats
- power supply thanks to the included Powerbank
SatPal is a DVB-S/DVB-S2 (HD) satellite signal meter operated with the SatPal application installed on a smartphone with iOS or Android. Ideal for starting up every SAT TV system. The Sat Finder function, supported by GPS signals, helps the installer to quickly and accurately align the satellite dish with the exact azimuth, elevation and tilt angle of the LNB. The SatPal R10844 meter with the real-time spectrum analyzer function enables professional measurements of signal strength and quality, MER, BER, PER and C/N. An activated buzzer helps to optimize the reception power depending on the signal level and signal quality. The user-friendly setup and report wizard generates comprehensive reports in a variety of formats.
Specifications
| Product code | R10844 | ||
| Product type | Meter | ||
| Type | SAT | ||
| Model | SatPal | ||
| Brand | Inverto | ||
| Head | DVB-S/S2 | YES | |
| DVB-T/T2 | NO | ||
| DVB-C | NO | ||
| Monitoring of channels | Display | Status LED, Bluetooth LED, power LED | |
| FM/TV signal measurement | Parameters | dBμV, dBm, % | PWR |
| dB | MER | ||
| - | BER | ||
| dB | C/N | ||
| Device specifications | |||
| Receiver DVB-S/S2 | Frequency range | MHz | 950...2150 |
| Signal strength | dBμV | 30...110 | |
| Control signals | 13/18V, 0/22 kHz, DiSEqC 1.0, 1.1,1.2 Unicable (dSCR) | ||
| LNB supply | V | 13/18 | |
| Connector | F-socket | ||
| General | |||
| Connectors | F, mini USB | ||
| Battery | Powerbank | mAh | 12000 |
| Warranty | 12 months | ||
| Accessories | car charger, powerbank | ||
| Weight | kg | 0.35 | |
| Dimensions | mm | 150x100x30 | |
Specifications
| Product type | Meter | ||
| Meter type | DVB-S/S2 | ||
| Brand | Inverto | ||
| Model | SatPal | ||
| Measured parameters | Signal power level, MER, BER, C/N | ||
| Spectrum analyzer | Yes | ||
| Specifications | |||
| Receiver DVB-S/S2 | Frequency range | MHz | 950...2150 |
| Signal strength | dBm | -80...0 | |
| converters supported | Fullband, Unicable (dSCR) | ||
| DiSEqC | Yes – 1.0, 1.1, 1.2 | ||
| LNB supply | V | 13/18 | |
| Connector | F-socket | ||
| Power supply | |||
| Battery | capacity | mAh | 12000 |
| Other information | |||
| Additional connectors | miniUSB | ||
| Accessories | powerbank, car charger | ||
| Dimensions | mm | 150 × 100 × 30 | |
| Weight | kg | 0,35 | |
