EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The Signal GSM-505 repeater is used for the amplification of the GSM signal and its introduction indoors. The amplification area is approximately 500 m².
• Amplification and distribution of GSM+EGSM signals in buildings/rooms
• Indoor coverage area up to 500 square meters
• Automatic level control (AGC, ALC)
• MGC - manual gain control (attenuator)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
• Indoor coverage area up to 500 square meters
• Automatic level control (AGC, ALC)
• MGC - manual gain control (attenuator)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
The two-way GSM splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the frequencies 800-2500 MHz.
• Number of outputs: 2
• Bandwidth 800-2500 MHz
• 3.5 dB attenuation
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• 3.5 dB attenuation
• Connectors: N-sockets
An omnidirectional antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 3 dBi and is equipped with a 15 cm cable terminated with an N connector.
• Band 806-2500 MHz
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• N-connector
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• N-connector
Antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 9.5 dBi.
• Band 806-2500 MHz
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-plug - N-plug
• Connector length 5 m
• Connector length 5 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Connector length 10 m
The DC 9 V power supply is designed to supply power to GSM repeaters (A6765, A6775, A6785). It is equipped with a 1 m cable with a 2.1/5.5 mm plug.
• 100...230 V AC / 9 V DC 3 A
