EN
PL
CZ
DE
IE
HU
PT
RO
SK
DIPOL 1/RUZ/PM is an omnidirectional antenna designed to receive FM radio signals in horizontal H and vertical V polarisation.
• Band 88 - 108 MHz (FM)
• Gain max. 0 dBi
• Polarisation H, V
• Number of elements: 1
• Gain max. 0 dBi
• Polarisation H, V
• Number of elements: 1
The antenna with H/V polarization Dipol 28/5-12/21-60 (28 elements) with LNA-101 amplifier is designed to receive DVB-T/T2 digital terrestrial television in VHF and UHF bands.
• Combo antenna - reception of all TV bands
• Band 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Gain max. 14 dBi (UHF), 7 dBi (VHF)
• H/V polarisation for both bands
• Directional radiation pattern
• Number of elements: 28
• Band 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Gain max. 14 dBi (UHF), 7 dBi (VHF)
• H/V polarisation for both bands
• Directional radiation pattern
• Number of elements: 28
![Steel Satellite Dish: FAMAVAL 80 SP 30 [dark]](https://www.dipol.com.pl/img/thumbnails/a9654+.jpg/9ad0dd50d167901fef7ad9c76097e667.jpg)
Satellite dish, offset 80 cm, graphite, designed to receive satellite signals from one or two satellites (multifeed configuration).
• Size: 80 cm
• Material: steel
• Resistant to strong winds
• Max. gain 38.3 dBi
• Material: steel
• Resistant to strong winds
• Max. gain 38.3 dBi
Quatro LNB dedicated for multiswitch systems. Noise figure: 0.3 dB.
• LNB type: QUATRO
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
The DS-2CD1321-I (F) camera is dedicated for IP CCTV systems.
Code: K17412
This product is no longer available
The DS-2CD1021-I(E) camera is dedicated for professional IP CCTV systems.
Code: K17812
This product is no longer available
The 8-port switch TP-Link TL-SF1008D finds widespread use in small and medium computer networks. Due to Auto MDI/MDIX function it does not bother the installer about the problem of straightforward or crossover cables...
Code: N29918
This product is no longer available
The RTV-SAT terminal socket (surface/plaster) is used in multiswitch installations.
• Outlet used in multiswitch installations
• Filtering of signals into 3 paths: radio, DVB-T/T2, TV-SAT
• Surface or flush mounting
• Easy to install
• Maximum attenuation 3.5 dB
• Filtering of signals into 3 paths: radio, DVB-T/T2, TV-SAT
• Surface or flush mounting
• Easy to install
• Maximum attenuation 3.5 dB
MR508 5 in/8 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 8 single outlets or 4 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 8 single outlets or 4 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
The RSI-02Ms R85315 operates as a combiner or splitter of broadcast signals in the frequency range 47-862 MHz.
• Shielded housing
• Rubber covers for F-plugs
• Pole mounting with cable tie
• Current pass between one of the outputs and the input (max. 24 V/250 mA)
• Can operate as a combiner or splitter
• Rubber covers for F-plugs
• Pole mounting with cable tie
• Current pass between one of the outputs and the input (max. 24 V/250 mA)
• Can operate as a combiner or splitter
Modulator Signal-420 HDMI – 1×COFDM (DVB-T) enables the conversion of signals from one HDMI source to the DVB-T standard.
• Proven HDMI-DVB-T modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Simple installation, intuitive configuration
• Configurable parameters such as LCN, SID, PID, NIT
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Simple installation, intuitive configuration
• Configurable parameters such as LCN, SID, PID, NIT
