English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
![Satellite Dish FAMAVAL TRX-EL 110 [dark]](https://www.dipolnet.com/img/thumbnails/a9659+.jpg/b26cc5ba4823f8d4c061c5d7be913473.jpg)
FAMAVAL 110 TRX EL A9659 high-gain satellite dish (119 cm x 110 cm) provides reliable reception in all weather conditions or in regions with low signal levels. The high-tech steel dish is extremely weather resistant.
• 110 cm dark satellite dish
• Real reflector size: 114.5 x 105 cm
• Gain: 41.2 dBi
• Mountable on a mast with diameter up to 60 mm
• Steel construction for stability in any weather conditions
• Perfect for SMATV and high quality individual SAT TV systems
• Real reflector size: 114.5 x 105 cm
• Gain: 41.2 dBi
• Mountable on a mast with diameter up to 60 mm
• Steel construction for stability in any weather conditions
• Perfect for SMATV and high quality individual SAT TV systems
The GT-WB1 LNB is dedicated for applications in multiswitch systems using Wide Band technology. It is based on a single local oscillator operating at 10.41 GHz.
• LNB type: Wide band for multiswitch systems
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
The tap is CE certified. Its operating frequency range is 5-1000 MHz. The product ensures good quality and suitability for professional use. The tap is equipped with F connectors and cast aluminum housing.
The power supply is dedicated for Terra Digital SCR multiswitch systems. The output F-male connector provides 20 VDC voltage (+ at the tip) with current capacity 2 A. The input voltage can be within 180 to 240 VAC range (50 Hz).
The SRM522 R80522 cascadable single-cable multiswitch allows for distribution of DVB-S/S2 signals from one satellite and terrestrial signals (DVB-T, DAB/FM radio). The satellite signals can be distributed by means of dSCR technology (digital Satellite Cable Router), requiring only one coaxial line a...
• New! Multiswitch for systems with Unicable receivers
• Signals from a Wideband LNB are fed only via two cables from one satellite
• Compatibility with quatro LNBs (after reprogramming with PC102W programmer)
• Full compliance with EN50494 - Unicable I, 8 UBs (User Bands)
• Full compliance with EN50607 - Unicable II, 32 UBs
• Possibility of using receivers compliant with EN50607 and EN50494 in the same distribution network
• Static mode: IF/IF converter
• Dynamic mode: distribution of signals to up to 32 receivers
• Signals from a Wideband LNB are fed only via two cables from one satellite
• Compatibility with quatro LNBs (after reprogramming with PC102W programmer)
• Full compliance with EN50494 - Unicable I, 8 UBs (User Bands)
• Full compliance with EN50607 - Unicable II, 32 UBs
• Possibility of using receivers compliant with EN50607 and EN50494 in the same distribution network
• Static mode: IF/IF converter
• Dynamic mode: distribution of signals to up to 32 receivers
The 8xDVB-S/S2 (8PSK, QPSK) - 4xDVB-T (COFDM) tdx441 FTA transmodulator allows the conversion of DVB-S/S2 signals from 8 satellite transponders to 4 DVB-T MUXes.
• DVB-S/S2 signal conversion from 8 satellite transponders to 4 DVB-T COFDM multiplexes,
• FTA uncoded programs,
• Reception of 8 satellite transponders and conversion to any 8 DVB-T multiplexes,
• Channel selection and filtering of unnecessary services in the digital stream,
• Compatible with dSCR/Unicable multiswitch series,
• Control via RJ-45 port, for a much simpler installation procedure,
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
• FTA uncoded programs,
• Reception of 8 satellite transponders and conversion to any 8 DVB-T multiplexes,
• Channel selection and filtering of unnecessary services in the digital stream,
• Compatible with dSCR/Unicable multiswitch series,
• Control via RJ-45 port, for a much simpler installation procedure,
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
• A 12 V power supply for TERRA modules,
• Current capacity: 4.5 A,
• DIN rail mounting,
• Distribution cables for passing supply voltage between adjacent modules included in the kit.
• Current capacity: 4.5 A,
• DIN rail mounting,
• Distribution cables for passing supply voltage between adjacent modules included in the kit.
