EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
![Satellite dish: DIPOL DPL-120 [light grey, RAL7035]](https://www.dipol.com.pl/img/thumbnails/a9682+.jpg/e3ea8e533494b25636c83315da7db4f5.jpg)
The DPL-120 satellite dish is a professional satellite dish dedicated for building SMATV systems in multi-family buildings.
• Dish dedicated for SMATV systems
• Size: 120 cm (122x129 cm)
• Gain max. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point dish mounting to intermediate dish
• Meets IEC1114-2 wind resistance standard
• Antenna has been salt bath tested to NBR 8094 standard
• The LNB is mounted on a bracket with two additional brackets.
• Second LNB bracket included
• Size: 120 cm (122x129 cm)
• Gain max. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point dish mounting to intermediate dish
• Meets IEC1114-2 wind resistance standard
• Antenna has been salt bath tested to NBR 8094 standard
• The LNB is mounted on a bracket with two additional brackets.
• Second LNB bracket included
Quatro LNB dedicated for multiswitch systems. Noise figure: 0.3 dB.
• LNB type: QUATRO
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
The splitter operates from 5-1000 MHz and its performance is similar to other splitters in this class.
• Operating bandwidth 5-1000 MHz
• Spur attenuation 12 dB
• F-type connectors
• Cast aluminium alloy housing
• Spur attenuation 12 dB
• F-type connectors
• Cast aluminium alloy housing
The PS202F 2 A 20 V switched-mode power supply is designed for TERRA dSCR multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
Multiswitch SRM522 5in/2output without power supply and passive terrestrial TV path dedicated for RTV/SAT installations supporting dSCR/Unicable system.
• Multiswitch dedicated to work with Unicable I/II receivers
• Number of outputs: 2xdSCR/Legacy
• Built-in AGC in the SAT path
• Passive terrestrial path.
• Compatible with Quatro and WideBand LNBs - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, it allows division to signal up to max. 32 receivers
• Number of outputs: 2xdSCR/Legacy
• Built-in AGC in the SAT path
• Passive terrestrial path.
• Compatible with Quatro and WideBand LNBs - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, it allows division to signal up to max. 32 receivers
The 8xDVB-S/S2 (8PSK, QPSK) - 8xDVB-T (COFDM) tdx481 FTA transmodulator allows the conversion of DVB-S/S2 signals from 8 satellite transponders to 8 DVB-T MUXes.
• Conversion of DVB-S/S2 signal from 8 satellite transponders to 8 DVB-T COFDM multiplexes
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 8 DVB-T multiplexes
• Channel selection and filtering of unnecessary services in the digital stream
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 8 DVB-T multiplexes
• Channel selection and filtering of unnecessary services in the digital stream
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
The UP-413 power supply is designed to provide redundant power to Terra channel amplifiers, transmodulators, IP streamers mounted on universal DIN rails.
• 12 V DC power supply for TERRA panels
• Current capacity 4.5 A
• DIN rail mounting
• Includes tapes for power distribution between panels
• Current capacity 4.5 A
• DIN rail mounting
• Includes tapes for power distribution between panels
