English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
DIPOL-4/5-12 is a four-element antenna designed for the reception of DVB-T/T2 digital television signals and DAB radio signals broadcast in the VHF band.
• Band 170 - 230 MHz (VHF)
• Gain max. 6 dBi
• V polarisation (can be turned to H polarisation)
• Directional radiation pattern
• Number of elements: 4
• Gain max. 6 dBi
• V polarisation (can be turned to H polarisation)
• Directional radiation pattern
• Number of elements: 4
DIPOL 1/RUZ/PM is an omnidirectional antenna designed to receive FM radio signals in horizontal H and vertical V polarisation.
• Band 88 - 108 MHz (FM)
• Gain max. 0 dBi
• Polarisation H, V
• Number of elements: 1
• Gain max. 0 dBi
• Polarisation H, V
• Number of elements: 1
DIPOL SMART HORIZON is a directional TV antenna designed to receive digital terrestrial television DVB-T2 in UHF band. It is intended for individual and SMATV systems.
• DVB-T2 reception on channels 21 - 48 (470 - 694 MHz)
• Operation in "passive" or "active" mode
• Gain max: 14 dBi (UHF)
• Gain + gain: 26.2 dB (UHF)
• Hermetic box with F-type connector
• Tool-less assembly in 1.5 minutes
• Made of aluminium and ABS
• Reinforced main profile
• Built-in LTE 700 filter
• Application in individual as well as collective installations
• Operation in "passive" or "active" mode
• Gain max: 14 dBi (UHF)
• Gain + gain: 26.2 dB (UHF)
• Hermetic box with F-type connector
• Tool-less assembly in 1.5 minutes
• Made of aluminium and ABS
• Reinforced main profile
• Built-in LTE 700 filter
• Application in individual as well as collective installations
The OTF302 6F31 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1310 nm wavelength (transmission window II).
• FP type laser
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
The ORQ302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E A3031 or OTF302 6F55 E A3055 transmitter into an electrical signal. QUATRO + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
![Satellite dish DIPOL DPL-120 + stub [dark graphite, RAL7016]](https://www.dipol.com.pl/img/thumbnails/a9684+.jpg/380d7369ec3d0738a2ae514cef5c6779.jpg)
The DPL-120 satellite dish is a professional satellite dish dedicated for building SMATV systems in multi-family buildings.
• Dish dedicated for SMATV systems
• Size: 120 cm (122x129 cm)
• Max gain. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point mounting to an intermediate dish
• Complies with IEC1114-2 wind resistance standard
• Tested in brine bath according to NBR 8094
• LNB mounted with a holder with two additional brackets
• Second LNB holder included
• Size: 120 cm (122x129 cm)
• Max gain. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point mounting to an intermediate dish
• Complies with IEC1114-2 wind resistance standard
• Tested in brine bath according to NBR 8094
• LNB mounted with a holder with two additional brackets
• Second LNB holder included
Low-noise LWB202L Wideband LO 10.41 GHz satellite converter dedicated to SAT installations.
• LNB type: Wideband
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
The R70501 SA-51 amplifier is designed for use in SMATV systems based on 5-input multiswitches. It has four satellite inputs and DVB-T/DAB/FM (Terr.TV) input. Placed on the input of the SMATV system, the device amplifies and equalizes the signals before further distribution.
• Amplifier with power supply designed for 5-input multiswitches
• High output level
• Die-cast housing providing high screening efficiency (class A)
• Power supply for other active devices in the distribution network
• Power supply for a DVB-T preamplifier
• High output level
• Die-cast housing providing high screening efficiency (class A)
• Power supply for other active devices in the distribution network
• Power supply for a DVB-T preamplifier
The splitter is used in multiswitch installations to extend the signal bus, consisting of four satellite lines that carry signals from a Quatro LNB and terrestrial line with DVB-T, DAB, FM signals, into four branches/subnetworks. The device is equipped with two DC-transition switches that in "ON" po...
• Sub-network partition (4 branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
MR532 5 in/32 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium-sized installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing up to 32 single outlets or 16 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing up to 32 single outlets or 16 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
The power supply is dedicated for Terra Digital SCR multiswitch systems. The output F-male connector provides 20 VDC voltage (+ at the tip) with current capacity 2 A. The input voltage can be within 180 to 240 VAC range (50 Hz).
Outdoor three-input antenna branching filter, used as triplexer for combining signals from three antennas receiving signals in FM+VHFI/II (47-108 MHz), VHFIII (170-230 MHz) and UHF (470-790 MHz) bands. The DC015L R82018 device is normally installed on the mast carrying the antenna set. The construct...
• Combining signals from three antennas receiving signals in FM+VHFI/II (47-108 MHz), VHFIII (170-230 MHz) and UHF (470-790 MHz) bands
• Mast-mount just by antennas
• Small size cast metal case put into compact size plastic housing
• Mast-mount just by antennas
• Small size cast metal case put into compact size plastic housing
The DTT MCA101T TERRA masthead correction amplifier is dedicated to work with OTF30x transmitters
• Dedicated to work with TERRA's OTF30x optical transmitters
• Frequency converter
• Automatic Gain Control (AGC) circuit to ensure signal stability
• Built-in LTE700 filter
• Remote DC power supply
• Capable of outdoor mounting
• Frequency converter
• Automatic Gain Control (AGC) circuit to ensure signal stability
• Built-in LTE700 filter
• Remote DC power supply
• Capable of outdoor mounting
