EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
TERRA's LWO102 4F31 E optical LNB is used to create SAT systems using fiber optic technology.
Code: A3033
This product is no longer available
The ORF202 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband type output.
Code: A3131
This product is no longer available
The ORQ302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E A3031 or OTF302 6F55 E A3055 transmitter into an electrical signal. QUATRO + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
![Satellite dish DIPOL DPL-120 + stub [dark graphite, RAL7016]](https://www.dipol.com.pl/img/thumbnails/a9684+.jpg/380d7369ec3d0738a2ae514cef5c6779.jpg)
The DPL-120 satellite dish is a professional satellite dish dedicated for building SMATV systems in multi-family buildings.
• Dish dedicated for SMATV systems
• Size: 120 cm (122x129 cm)
• Max gain. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point mounting to an intermediate dish
• Complies with IEC1114-2 wind resistance standard
• Tested in brine bath according to NBR 8094
• LNB mounted with a holder with two additional brackets
• Second LNB holder included
• Size: 120 cm (122x129 cm)
• Max gain. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point mounting to an intermediate dish
• Complies with IEC1114-2 wind resistance standard
• Tested in brine bath according to NBR 8094
• LNB mounted with a holder with two additional brackets
• Second LNB holder included
FOS 108 E optical splitter is an element used to divide the optical signal into 8 paths.
• Dividing the signal into 8 paths
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
Multiswitch MV532 5 in/32 out multiswitch without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 32 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 32 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
The PS182F 2 A 18 V switched-mode power supply is designed for TERRA's MRP and MV/MS multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC output 18 V, 2 A
• Output: F-plug
• Recommended for MRP, MS and MV series multiswitches
• DC output 18 V, 2 A
• Output: F-plug
• Recommended for MRP, MS and MV series multiswitches
The PS202F 2 A 20 V switched-mode power supply is designed for TERRA dSCR multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
Multiswitch SRM584 5-in/8-out (quatro/wideband) without power supply and with active terrestrial TV path, dedicated for RTV/SAT installations supporting the dSCR/Unicable system.
• Multiswitch dedicated to work with Unicable I/II receivers
• Number of outputs: 8xdSCR/Legacy
• Built-in AGC in the RTV/SAT path
• Active terrestrial TV path
• Built-in LNB type switch: Quatro and WideBand - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, allows division to signal up to max. 32 receivers
• Number of outputs: 8xdSCR/Legacy
• Built-in AGC in the RTV/SAT path
• Active terrestrial TV path
• Built-in LNB type switch: Quatro and WideBand - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, allows division to signal up to max. 32 receivers
