EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
DIPOL-4/5-12 is a four-element antenna designed for the reception of DVB-T/T2 digital television signals and DAB radio signals broadcast in the VHF band.
• Band 170 - 230 MHz (VHF)
• Gain max. 6 dBi
• V polarisation (can be turned to H polarisation)
• Directional radiation pattern
• Number of elements: 4
• Gain max. 6 dBi
• V polarisation (can be turned to H polarisation)
• Directional radiation pattern
• Number of elements: 4
DIPOL 1/RUZ/PM is an omnidirectional antenna designed to receive FM radio signals in horizontal H and vertical V polarisation.
• Band 88 - 108 MHz (FM)
• Gain max. 0 dBi
• Polarisation H, V
• Number of elements: 1
• Gain max. 0 dBi
• Polarisation H, V
• Number of elements: 1
DIPOL SMART HORIZON is a directional TV antenna designed to receive digital terrestrial television DVB-T2 in UHF band. It is intended for individual and SMATV systems.
• DVB-T2 reception on channels 21 - 48 (470 - 694 MHz)
• Operation in "passive" or "active" mode
• Gain max: 14 dBi (UHF)
• Gain + gain: 26.2 dB (UHF)
• Hermetic box with F-type connector
• Tool-less assembly in 1.5 minutes
• Made of aluminium and ABS
• Reinforced main profile
• Built-in LTE 700 filter
• Application in individual as well as collective installations
• Operation in "passive" or "active" mode
• Gain max: 14 dBi (UHF)
• Gain + gain: 26.2 dB (UHF)
• Hermetic box with F-type connector
• Tool-less assembly in 1.5 minutes
• Made of aluminium and ABS
• Reinforced main profile
• Built-in LTE 700 filter
• Application in individual as well as collective installations
![Satellite dish: DIPOL DPL-120 [light grey, RAL7035]](https://www.dipol.com.pl/img/thumbnails/a9682+.jpg/e3ea8e533494b25636c83315da7db4f5.jpg)
The DPL-120 satellite dish is a professional satellite dish dedicated for building SMATV systems in multi-family buildings.
• Dish dedicated for SMATV systems
• Size: 120 cm (122x129 cm)
• Gain max. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point dish mounting to intermediate dish
• Meets IEC1114-2 wind resistance standard
• Antenna has been salt bath tested to NBR 8094 standard
• The LNB is mounted on a bracket with two additional brackets.
• Second LNB bracket included
• Size: 120 cm (122x129 cm)
• Gain max. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point dish mounting to intermediate dish
• Meets IEC1114-2 wind resistance standard
• Antenna has been salt bath tested to NBR 8094 standard
• The LNB is mounted on a bracket with two additional brackets.
• Second LNB bracket included
The QUATRO INVERTO LNB is designed for operation in multiswitch systems (with one output for each band/polarization pair).
• LNB type: QUATRO
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
• Premium class LNB
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
• Premium class LNB
Optical splitter used to split an optical signal into 4 paths.
• Split signal on 4 tracks
• SC/APC sockets
• BOX type housing
• Attenuation max. 7,4 dB
• SC/APC sockets
• BOX type housing
• Attenuation max. 7,4 dB
F-plug - F-plug connector.
• F-plug to F-plug transition
• Fast" type plugs - no need to screw the nut on the socket
• Fast" type plugs - no need to screw the nut on the socket
Terminating resistor with DC block, for closing unused RF inputs/outputs of SS-5xx taps and multiswitches.
• F-type connector
• DC lock
• Mounted on unloaded inputs of taps, splitters, multiswitches and amplifiers
• DC lock
• Mounted on unloaded inputs of taps, splitters, multiswitches and amplifiers
The SIGNAL PRO MS-508 multiswitch enables distribution of signals from one satellite, terrestrial DVB-T2 and FM/DAB+ radio to 8 terminal outlets.
• 5 inputs (4×SAT, 1×TERR)
• 8 independent subscriber outputs
• Pass-through design (cascadable)
• very good impedance matching (IRL > 21 dB)
• Die-cast housing
• 8 independent subscriber outputs
• Pass-through design (cascadable)
• very good impedance matching (IRL > 21 dB)
• Die-cast housing
SIGNAL PRO optical transmitter TR-501 is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 1xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (1 satellite position) and radio/DVB-T2 signals
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
The REC-105 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 1xQUATRO + radio/DVB-T2.
• Output type 1xQUATRO + radio/DVB-T2
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
The WWK ALPHA 2 is an advanced digital channel amplifier designed for professional SMATV antenna installations and extensive individual installations.
• Digital selective signal processing DVB-T2 (DSP)
• Channel conversion within the VHF and UHF bands
• Individual level control of each MUX and global output control
• DAB wideband mode (174-230 MHz) without channel programming
• Advanced LTE 700/LTE 800 filtering, SAW filter active in LTE 700 mode
• SMART SCAN function - automatic search for DVB-T2 signals
• Intelligent power control of preamplifiers (Auto Preamp Control)
• High immunity to overdrive and interference (IMD3 to 122 dBµV)
• Class A shielding according to EN 50083-2
• Compact metal casing
• Channel conversion within the VHF and UHF bands
• Individual level control of each MUX and global output control
• DAB wideband mode (174-230 MHz) without channel programming
• Advanced LTE 700/LTE 800 filtering, SAW filter active in LTE 700 mode
• SMART SCAN function - automatic search for DVB-T2 signals
• Intelligent power control of preamplifiers (Auto Preamp Control)
• High immunity to overdrive and interference (IMD3 to 122 dBµV)
• Class A shielding according to EN 50083-2
• Compact metal casing
